Vivotek SD7151 User Manual page 92

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Post data:
fimage=<file name>[&return=<return page>]\r\n
\r\n
<multipart encoded form data>
Server will accept the upload file named <file name> to be upgraded the firmware and return with <return page>
if indicated.
Camera Control
Note: This request requires privilege of viewer
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/viewer/camctrl.cgi?[channel=<value>][&camid=<value>][&move=<value>]
[&focus=<value>][&iris=<value>][&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>]
[&speedapp=<value>][&auto=<value>][&zoom=<value>][&speedlink=<value>][&return=<return page>]
Parameter
channel
camid
move
speedpan
speedtilt
speedzoom
speedapp
auto
zoom
sethome
calibrate
return
92 - User's Manual
Value
<0~(n-1)>
0,<positive integer>
home
up
down
left
right
-5 ~ 5
-5 ~ 5
-5 ~ 5
1 ~ 5
pan
patrol
stop
wide
tele
define
default
go
<return page>
Description
Channel of video source
Camera ID
Move the Network Camera to home position
Move the Network Camera up
Move the Network Camera down
Move the Network Camera left
Move the Network Camera right
Set the pan speed
Set the tilt speed
Set the zoom speed
Set the auto pan/patrol speed
Auto pan
Auto patrol
Stop camera
To zoom for larger view with current speed
To zoom for farer view with current speed
Set current position as home position
Using default home position
Recalibrate the home position to the default center
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.