Application - Vivotek SD7151 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Application

This section explains how to configure the Network Camera to react in response to particular
situations. A typical application is that when a motion is detected, the Network Camera sends
buffered images to a FTP server or via e-mail as notifications.
In the illustation on the right side, an event
can be triggered by many sources, such
A
as motion detection or external digital
e . ti dete ti
input devices. When an event is triggered,
eri di ll i it l i p t
ste re t
you can specify what kind of action will be
performed. You can configure the Network
t t se d ere t se d
Camera to send snapshots or videos to your
e . ps t ide lips
e . il
email address or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the
Network Camera will know what action shall be performed when a trigger is activated.
Media Settings
In Media Settings column, click Add to open the media setting page. In this page, you can
specify what kind of media to send when a trigger is activated. A total of five media settings can
be configured.
User's Manual - 49