Vivotek SD7151 User Manual page 48

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Return to home position after
Enter a number to set the Network Camera to return to home position after it has been
motionless for seconds. Note that this function will be disabled if you have setup a patrol
selection.
Patrol selection
The preset position names will also appear in the Preset locations list on the left. You can also
select some preset positions for the Network Camera to patrol.
For example:
The preset positions will also show on the camera control panel on the Home page as below.
■ Click Go to: The Network Camera will move to the preset position.
Click Patrol: The Network Camera will patrol among the selected preset positions (from right
■
to left) for once.
48 - User's Manual
seconds