Vivotek SD7151 User Manual page 74

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
daylight_enable <boolean>
daylight_
<boolean>
dstactualmode
daylight_auto_
string[19]
begintime
daylight_auto_
string[19]
endtime
0,
3600,
updateinterval 86400,
604800,
2592000
0,
restore <positive
integer>
0,
reset <positive
integer>
restoreexceptnet <Any value>
restoreexceptdst <Any value>
SubGroup of system: info (The fields in this group are unchangeable.)
Name Value
modelname string[40]
serialnumber <mac address>
firmwareversion string[40]
language_count <integer>
language_i
string[16]
<0~(count-1)>
Group: status
Name Value
di_i<0~(ndi-1)> <boolean>
do_i<0~ndi-1)> <boolean>
onlinenum_rtsp integer
onlinenum_
integer
httppush
Group: di_i<0~(ndi-1)>
Name Value
high,
normalstate
low
74 - User's Manual
6/6 Enable automatic daylight saving to time zone
6/7
Check if current time is under daylight saving time.
6/7 Display the current daylight saving begin time.
6/7 Display the current daylight saving end time.
0 to Disable automatic time adjustment, otherwise, it means
6/6
the seconds between NTP automatic update interval.
Restore the system parameters to default value after
7/6
<value> seconds.
Restart the server after <value> seconds if <value> is non-
7/6
negative.
Restore the system parameters to default value except
7/6
(ipaddress, subnet, router, dns1, dns2, pppoe).
Restore the system parameters to default value except all
7/6
daylight saving time settings.
Security
Description
(get/set)
0/7 Model name of server
0/7 12 characters mac address without hyphen connected
The version of firmware, including model, company, and version
0/7
number in the format.
0/7 Number of webpage language available on the server
0/7 Available language lists
Security
Description
(get/set)
0 => Inactive, normal
1/7
1 => Active, triggered
0 => Inactive, normal
1/7
1 => Active, triggered
6/7 Current RTSP connection numbers
6/7 Current HTTP push server connection numbers
Security
Description
(get/set)
Indicate whether open circuit or closed circuit represents inactive
1/1
status