Joystick Settings - Vivotek SD7151 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Joystick Settings

This chapter explains how to remotely control the Network Camera with a USB joystick
(optional). It is easy to install and configure using USB interface.
Installation
Connect the USB plug of the joystick to a USB port on your computer. Supported by the plug-
in in the main page (Microsoft's DirectX), once the plug-in in the main page is loaded, it will
automaticlly detect if there is any joystick on the computer. The joystick should work properly
without installing any other driver or software.
The joystick will automatically appear in the Game Controllers list in the Windows Control Panel
on your computer. If you want to check out your device, go to the following page: Open Start >
Control Panel > Game Controllers
Pan/Tilt/Zoom function
In addition to using the control panel or clicking on the live view window, you can also control the
rotate handle of the joystick to remotely control a pan/tilt/zoom Network camera with ease.
Pan/Tilt: Move the rotating handle of the joystick left/right (horizontal), you can pan the camera to the
desired positions. Move the rotating handle of the joystick forwards/backwards (vertical), you can tilt
the camera to the desired positions. There will be a green line that displays the moving direction on the
center of the video image as the diagram 1 below.
Zoom in/Zoom out: Turn the rotating handle clockwise to zoom the camera in on an image and counter-
clockwise to zoom the camera out from an image. There will be a circle and four vectors on the center of
the video image as the diagram 2, 3 below.
P T
T T
64 - User's Manual