Network - Vivotek SD7151 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Network

This section explains how to configure wired network connection for the Network Camera. It is
composed of the following five columns: Network Type, HTTP, Two way audio, FTP and RTSP
Streaming. When completed with the settings on this page, click Save to take effect.
Network Type
LAN
Select this option when the Network Camera is deployed in a local area network (LAN) and is
intended to be accessed by local computers.
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a
DHCP server each time the camera is connected to the LAN.
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera.
Please refer to Internet connection with static IP on page 9 for details.
Enable UPnP presentation: Select this option to enable UPnP
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places. Currently, UPnP
utilize this feature, please make sure the UPnP
Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to
allow the Network Camera to open ports on the router automatically so that video streams can be sent
out from a LAN. To utilize of this feature, make sure that your router supports UPnPTM and it is activated.
28 - User's Manual
TM
TM
component is installed on your computer.
O S N
C 1 2 1 5 132
TM
presentation for your Network Camera
is supported by Windows XP or later. Note that to
http://192.168.5.1 2/index.html
Outdoor Speed Dome Network Camera