Vivotek sd6112v User Manual
  1. Manuals
  2. Brands
  3. Vivotek Manuals
  4. Security Camera
  5. sd6112v
  6. User manual
Vivotek sd6112v User Manual

Vivotek sd6112v User Manual

Vandal-proof network speed dome camera
Hide thumbs Also See for sd6112v:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Vivotek sd6112v

Summary of Contents for Vivotek sd6112v

  • Page 2 Product name: Speed Dome Camera (SD61x2V) Release Date: 2006/04/17 Manual Revision: 1.01 Web site: www.vivotek.com Email: technical@vivotek.com sales@vivotek.com Made in Taiwan. ©Copyright 2000-2006. All rights reserved - 1 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 3: Before You Use This Product

    For paragraphs preceded by completely the warnings. Ignoring the warnings may result in serious hazards or injuries. the reader should use caution to understand - 2 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 4: Package Contents

    Package Contents SD61x2V DC Power adapter Data Cable Alarm Cable Fixing Plate Hard Ceiling Mount Software CD Quick installation guide Warranty card - 3 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 5: Table Of Contents

    Client Settings ... 24 Administrator’s Capabilities ... 26 Fine-tuning for Best Performance ... 26 For Best Real-time Video Images... 27 Only Quality Images Will Do ... 27 Somewhere Between Real-time and Clear Images ... 28 - 1 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 6 Audio ... 53 Motion Detection... 55 Camera Control ... 56 Camera control area ... 56 Preset function area ... 56 Application Setup ... 59 Weekly Schedule ... 59 Event Operation ... 59 - 2 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 7 System Logs ... 86 Configuration File ... 87 Upload File (firmware)... 87 Camera Control ... 88 Recall ... 89 Position ... 90 System Information ... 92 Preset Locations ... 93 E. Technical Specifications ... 94 - 3 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 8: Installation

    UTP Category 5 and not exceed 100 meters in length. Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock. - 4 - Contents. www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 9: Indoor Dome Installation

    5. Network Cable (for IP Dome---Self-prepared) The length of RJ-45 connector should be no longer than 2 cm. NOTE: Definition ALM NO ALM NC ALM COM ISOG ALM-1 ALM-3 ALM-2 ALM-4 ALM-5 ALM-6 ALM-7 ALM-8 ALM GND - 5 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 10 Mount from the Decoration Cover. STEP 3 Attach the Mount to the ceiling. Mark the locations where all three ceiling holes should go. STEP 4 Drill these holes on the hard ceiling. Ceiling - 6 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 11 STEP 7 Attach the dome body to the Mount and rotate the dome body clockwise. Tighten the fixing screw on the fixing plate. - 7 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 12: In-Ceiling Mounting

    NOTE: The length of RJ-45 connector should be no longer than 2 cm. Tools Needed: 1. Tool for cutting a circle on the ceiling 2. Screw Driver Follow the steps to install the high speed dome camera for suspended ceilings. Decoration - 8 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 13 STEP 3 Rotate the T-Bar’s wings to fix the T-Bar at the edge of the ceiling hole. STEP 4 Tighten the screws on the wings. - 9 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 14 Note: If use an IP dome, a network cable is needed other than the data cable. STEP 6 Mount the dome body onto the bracket and rotate it clockwise. - 10 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 15: To Install In Ethernet

    INPUT (Max. 50mA, 12VDC) INPUT (Initial state of DI is low) SW_COMMON OUTPUT SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) - 11 - (open from www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 16: Software Installation

    (If the program is not on auto-run, go to the root directory of the software CD and click on “autorun.exe”). Click on “Software Utility” item, after the window contains changed, click on “Installation Wizard” to run Vivotek’s installation program. - 12 - www.vivotek.com...
  • Page 17 Upon Installation Wizard’s start up, a searching box will pop up. searches for Vivotek’s product on the same LAN: For the series number in the “Serial Number” field, please check the label on the bottom of the camera. After searching, Vivotek Video Servers or Network Cameras will be located by the Installation Wizard.
  • Page 18 192.168.0.98. After an IP address is assigned to the camera, the “Activity” status LED blinks. The Vivotek’s new UPnP function will always assign an IP address for the Network Camera. The Administrator can click on button “Link to selected device” to connect the I.E.
  • Page 19 For more detailed usage of the Installation Wizard, please refer to the user’s manual of the Installation Wizard. - 15 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 20: Initial Access To The Network Camera

    If the web browser does not allow the user to continue to install, check the Internet security option and lower the security levels or contact your IT or networking supervisor for help. - 16 - to proceed. www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 21: Check Network Settings

    System Configuration page for details. If any setting is entered incorrectly and cannot proceed to setting up the Network Camera, restore the factory settings following the steps in the “Troubleshooting” chapter of the Appendix. - 17 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 22: Add Password To Prevent Unauthorized Access

    Once the password is set, there is no provision to recover the Administrator’s password. The only option is to restore to the original factory default settings. - 18 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 23: How To Use

    The foreground is the login window and the background shows the message if authentication fails. The user may check the option box to save the password for future convenience. - 19 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 24: Primary User's Capabilities

    Pan/Tilt/Zoom control buttons: These buttons provide a command interface to control the aim of the camera. CCD control buttons: These buttons provide a command interface to control the aim of the camera. - 20 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 25: The Configuration

    Clicking on the “Snapshot” can get a JPEG format image of the current camera view in another window. “Client Settings” Clicking on this button links you to the client setting page, please check the following session for more details. - 21 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 26: The Camera View

    This selection box sets the moving range of the “zoom in” and “zoom out” commands. “Focus speed” This selection box sets the moving speed of the “focus near” and “focus far” Microphone volume Speaker volume - 22 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 27: The Ccd Control Buttons

    Click to zoom widely and see more. Click focus Click to set IRIS smaller. Click to do auto Click telescopically Click to focus farer. Click to set IRIS bigger. Click to set auto - 23 - zoom www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 28: Client Settings

    If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol and save, then return to HOME to connect to the Network Camera. - 24 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 29 JPEG image from server according to the “Frame rate” settings. Talk Button Control Style – For the User to determine whether to “click once and talk” or “push to talk”. - 25 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 30: Administrator's Capabilities

    “Size”, “Maximum frame rate”, “Video codec type”, “Key frame interval”, “Fix bit rate”, and “Fix quality” on the Video Configuration page, are correlative to allow for achieving the best performance possible. - 26 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 31: For Best Real-Time Video Images

    For Best Real-time Video Images To achieve good real-time visual effect, th - 27 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 32: Somewhere Between Real-Time And Clear Images

    Somewhere Between Real-time and Clear Images If you have a broadband network, set “Fix quality” at ”Normal” or better, rather than - 28 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 33: Opening Accounts For New Users

    Each account has four kinds of privileges, which can be set individually. The “I/O access” privilege permits the user to access DI/DO of the server. The “Camera Control” privilege allows different control to pan/tilt/zoom - 29 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 34: More Flexible Options For Viewers

    If you want to expand to allow in more viewers, the host server should be able to handle large network traffic, which must handle the picture refreshing from the Network Camera. - 30 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 35: If The Web Space Has Ftp Service

    Set the Network Camera up as an FTP client to upload the pictures. The access to the Network Camera will be independent of the number of viewers and the picture quality will remain constant. - 31 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 36: If The Web Space Has No Ftp Service

    Network Camera. Define the refresh interval according to your network bandwidth for best result. If the refresh rate is too fast and there is a large number of visitors, this may overload the Network Camera and slows the response. - 32 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 37 Date(); setTimeout('refresh()', refreshrate*1000);} document.write('<img width="'+imgwidth+'" name="pic">'); if(document.images)window.onload=refresh; </script> <!-- End of scripts to auto refresh the image. //--> </p> </body> </html> //SECONDS BETWEEN REFRESH //IMAGE WIDTH //IMAGE HEIGHT src="'+image+'" height="'+imgheight+'" - 33 - //IMAGE URL www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 38: Build A Security Application

    DI of the eight inputs. 5. Set the delay before detecting next event to avoid continuous false alarms following - 34 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 39: Send Snapshots When Motion Is Detected

    12. Clicking on “Save” enables the activity display. Green means the motion in the window is under the watermark set by the Administrator and red means it is over the watermark, 13. Click on “Application” in the left column, - 35 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 40 14. Check on the window name set in step 9, 15. Check “Upload snapshots while motion detected”, if e-mailing the snapshots is preferred, 16. Check “Send snapshots by email”, 17. Click on “Save” to validate. - 36 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 41: Definitions In Configuration

    <url> http://<Network Camera>/setup/config.html <Network Camera> is the domain name or original IP address of the Network Camera. <url> http://<Network Camera>/setup/system.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 37 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 42: System Parameters

    “Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server. Remember to click on correct time will not be synchronized. to immediately validate the changes. Otherwise, the - 38 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 43: User Group Administration

    - 39 - www.vivotek.com T: 886-2-82455282 F: 886-2-80.0990.098.7l79T1...
  • Page 44 <url> http://<Network Camera>/setup/security.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 40 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 45: Edit User

    Edit User Type the new password, change the privilege and press <url> http://<Network Camera>/setup/edituser.vspx <Network Camera> is the domain name or original IP address of the Network Camera. to modify the account. - 41 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 46: General

    HTTP “HTTP port” This can be other than the default Port 80. Once the port is changed, the User must be notified the change for the connection to be successful. For instance, - 42 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 47: Streaming

    “UDP Video channel port” This can be something other than the default port 5003 in order to work with the port opened by the firewall. <url> http://<Network Camera>/setup/network.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 43 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 48: Ddns & Upnp

    “Save” Click on this button to save current settings for the DDNS service and UPnP function. <url> http://<Network Camera>/setup/ddnsupnp.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 44 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 49 <url> http://<Network Camera>/set-up/ddnsupnp.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 45 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 50: Mail & Ftp

    “1st FTP password” Granted password on the external FTP server. “1st FTP remote folder” Granted folder on the external FTP server. This folder is for system log information and for images captured due to sequential operation or digital - 46 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 51 “2nd FTP remote folder for motion detection” Granted folder on the external FTP server. This folder is for images captured due to motion detection events. “2nd FTP passive mode” Passive mode setting for the backup FTP server. - 47 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 52 <url> http://<Network Camera>/setup/mailftp.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 48 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 53: Video Codec Parameters

    "Flip" Vertically rotate the video. "Mirror" Horizontally rotate the video. Check options both if the Network Camera is installed upside down. “Improve efficiency in the multi-user environment” Check this option to improve - 49 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 54 But it will cause each connection slow a few minutes when connection established. <url> http://<Network Camera>/setup/video.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 50 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 55: Image Settings

    -5 to +5. The User may press “Preview” to fine-tune image. image “Save” to set the image settings. “Restore” to recall the original settings without incorporating changes. - 51 - field eleven When O.K., press Click www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 56: Camera Settings

    (3200K~8000K) to get correct colors. Checking “Low lux mode” helps seeing object in poor illuminative environment. “Enable BLC” option is for back light compensation. Normally, objects in front of light - 52 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 57: Audio

    “Bit rate” There are three kinds of bit-rate for audio. 32Kbps and 24Kbps are suitable for both music and speech like audio while 8Kbps are suitable for only speech like audio. - 53 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 59: Motion Detection

    “Percentage” This sets the space ratio of moving objects in the monitoring window. Higher sensitivity and small percentage will allow easier motion detection. <url> http://<Network Camera>/setup/motion.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 55 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 60: Camera Control

    * The preset function is valid only in optical zoom mode. “Preset position” This keeps a list for preset positions. Clicking on the “Delete” button will remove the current selected position from the preset list. - 56 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 61 “Enable IR control”, “Dwelling time” and “Patrol selections”. In other words, after changing these settings, and the “Save” button is not clicked, the new setting of the camera will not take effect. - 57 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 62 Preset function area <url> http://<Network Camera>/setup/camctrl.vspx <Network Camera> is the domain name or original IP address of the Network Camera. Camera control area - 58 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 63: Application Setup

    “Motion detection” and a note will show to direct the User to the configuration page for motion detection. “Trigger action” There are four options for two types of action. More than one - 59 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 64: Sequential Operation

    , after 3 o’clock, 4 minute and 5 second as the previous frame in event operation. If this suffix is omitted, the file named “video.jpg” on the external FTP server will be refreshed at the specified interval. sequential event - 60 - operation. instance, www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 65 <url> http://<Network Camera>/setup/app.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 61 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 66: Viewing System Log

    This function is the same as the “Center” button on the Remote Controller. Please note that there is no confirming message box after clicking on the “Calibrate” button, the Network Camera will calibrate immediately. - 62 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 67: Appendix

    RESTORE: 1. Poke the wrench to press on the button continuously. 2. Wait for self-diagnostic. During the diagnostic period, the red & green lights will flick for several times. 3. Withdraw the wrench when all the lights are off. - 63 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 68: Frequently Asked Questions

    Q Why is the timestamp different from the system time of my PC or notebook? A The timestamp is based on the system time of the Network Camera. It is maintained by a real-time clock inside and can be automatically synchronized with the time-server - 64 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 69 Network Camera, make sure you are using internal or external microphone. Q How many users are allowed to watch the Network Camera at the same time? A Too many users requesting the real-time multimedia content will jam the network. - 65 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 70 A Since the Network Camera is a "network camera", any incorrect network settings will make it inaccessible. If this happens, restore the factory default settings following the procedures in Appendix A. - 66 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 71: Cleaning The Lens

    C. Pan/Tilt/Zoom Data unit tilt angle: 0.46875 degree unit pan angle: 0.46875 degree Never touch the lens - 67 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 72 The Optical Zoom Position address: (for reference) Zoom Ratio X10 Lens Optical Zoom Position Data HiByte LowByte The Digital Zoom Position address: (for reference) Zoom Ratio X10 Lens Digital Zoom Position Data HiByte LowByte - 68 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 73: Url Commands Of The Network Camera

    <servername>. This is intended to be replaced with the name of the actual server. This can either be a name, e.g., "mywebcam" or "thecam.adomain.net" or the associated IP number for the server, e.g., 192.168.0.220. Syntax: http://<servername>/cgi-bin/video.jpg - 69 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 74: General Cgi Url Syntax And Parameters

    The file extension of the CGI is required. Syntax: http://<servername>/cgi-bin/<subdir>[/<subdir>...]/<cgi>.<ext> [?<parameter>=<value>[&<parameter>=<value>...]] Example: Setting digital output #1 to high http://mywebserver/cgi-bin/setparam.cgi?do1=h Get Server Parameter Values Note: This request require administrator access Method: GET/POST - 70 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 75 <parameter pair> is <parameter>=<value>\r\n [<parameter pair>] <length> is the actual length of content. Example: request IP address and it’s response Request: http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress Response: HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: 33\r\n \r\n network.ipaddress=192.168.0.123\r\n - 71 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 76: Set Server Parameter Values

    If you omit this parameter, it will redirect to an empty page. (note: The return page can be a general HTML file(.htm, .html) or a Vivotek server script executable (.vspx) file. It can not be a CGI command. It can not have any extra parameters.

  • Page 77: Available Parameters On The Server

    NTP server time zone, 8 means GMT +8:00 0 to Disable automatic time adjustment, otherwise, between NTP automatic update interval. 12 characters mac address without - 73 - sync date/time sync date/time means seconds www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 78 – Permit to talk to server listen – Permit to listen from server camctrl – Permit to do camera control conf – Permit - 74 - firmware, including system parameters server after <value> version currently change server’s www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 79 80 characters mail recipient address, max 63 characters mail recipient address, max 15 characters name secondary SMTP server, max 40 characters mail recipient address, max 80 characters - 75 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 80 FTP server, max 63 characters characters upload folder in secondary FTP server, max 40 characters Enable passive mode of primary FTP server Disable passive mode of primary FTP server - 76 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 81 64K bps set bit rate to 128K bps set bit rate to 256K bps set bit rate to 384K bps set bit rate to 512K bps - 77 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 82 Simplex – Listen only Do not send audio from active client to all other clients Send audio from active client to all other clients (only possible in Half-duplex) Use external microphone in - 78 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 83 Directly save the adjust image parameters DESCRIPTION disable motion detection enable motion detection disable motion window #1 enable motion window #1 string shorter name of motion window #1 Left coordinate of window position. - 79 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 84 Your dynamic hostname. Your user or email to login ddns service provider Your password or key to login ddns service provider Update the above ddns settings to take effect DESCRIPTION - 80 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 85 Tilt speed Zoom speed Auto pan speed Time to dwelling when patrol Enable or disable the IR control The name of preset location The pan coordinate of preset location. - 81 - safe100.net UPNP Port www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 86: Drive The Digital Output

    (1/50). Bigger value, faster shutter. 0: auto tracking white balance 1: Indoor mode 2: Outdoor mode 0 or 1 Turn off or on low lux mode 0 or 1 Disable compensation. - 82 - enable back light www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 87: Query Status Of The Digital Input

    The <return page> can be a full URL path or relative path according the the current path. If you omit this parameter, it will redirect to an empty page. - 83 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 88: Capture Single Snapshot

    Note: This request require normal user privilege Method: GET/POST Syntax: http://<servername>/cgi-bin/video.jpg Server will return the most up-to-date snapshot in JPEG format. The size and quality of image will be set according to the JPEG settings on the server. - 84 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 89: Account Management

    Modify the account password and privilege. When using this method, “username” field is necessary, and other fields are optional. If not specified, it will keep original settings. The name of user to add, delete or edit - 85 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 90: System Logs

    The <return page> can be a full URL path or relative path according the the current path. If you omit this parameter, it will redirect to an empty page. - 86 - privilege www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 91: Configuration File

    Server will return the up-to-date configuration file. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <configuration file length>\r\n \r\n <configuration data>\r\n Upload File (firmware) Note: This request requires administrator privilege Method: POST Syntax: http://<servername>/cgi-bin/admin/upload.cgi Post data: - 87 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 92: Camera Control

    Move to camera to home position Move camera up Move camera down Move camera left Move camera right Set the pan speed Set the tilt speed Set the zoom speed Set the auto pan/patrol speed Auto pan - 88 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 93: Recall

    URL path or relative path according to the current path. If you omit this parameter, it will redirect to an empty page. description less One of the present positions to recall. - 89 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 94: Position

    The <return page> can be a full URL path or relative path according to the current path. If you omit this parameter, it will redirect to an empty page. - 90 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 95 : mintilt=21 return maximum zoom range. return syntax : minzoom=0 Set absolute pan position. Set absolute tilt position. Set absolute zoom position. Set moving speed of set position command, 7 above is recommended. - 91 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 96: System Information

    => Support pan operation. 0(not support), 1(support) Bit 3 => Support tilt operation. 0(not support), 1(support) Bit 4 => Support zoom operation. 0(not support), 1(support) Bit 5 => Support focus operation. 0(not support), 1(support) - 92 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 98: Technical Specifications

    Adapter input: 100-240VAC, 50/60Hz, 0.4A Adapter output: 12VDC, 1.5A - Operating Environment Temperature: 0-40°C/32-104°F Humidity: 85%RH -EMI & Safety CE, FCC - Viewing system requirement Operating System Microsoft Windows 98SE/ME/2000/XP Browser Internet Explorer 5.x or above - 94 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 99: Technology License Notice

    VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM INCLUDING THAT RELATING - 6 - TO PROMOTIONAL, www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 100 B of EN55022/1998, and the requirement for immunity according to EN50082-1/1992. Liability Vivotek Inc. cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Vivotek Inc. makes no warranty of any...

This manual is also suitable for:

Sd6122v

Table of Contents