Watchguard DVR4ENTPACK Quick Installation Manual page 4

Quick Start up Guide
•
Make sure your TV/Monitor is ON and set to the appropriate AV channel if required
•
Press the Power button located on the front panel of the DVR, the LED will illuminate Green
it takes approximately 10 to 15 seconds to boot the system.
•
The images from all 4 cameras should now be displayed on your TV/Monitor
•
BEFORE BEGINNING TO RECORD YOU MUST SET the DATE and TIME on your DVR.
Setting the Date and Time
•
Press "MENU" button to enter the (OSD) On Screen Display menu list.
The default admin password is 0000.
Enter the default password by pressing "ENTER" 4 times.
(Users can alter the password later. Please refer to the Advanced set up guide CD)
•
Use the following buttons to move the cursor for menu settings:
"UP=▲,DOWN=▼,LEFT=◄,RIGHT=► "
(MENU)
RECORD
TIMER
D A T E
D A T E
ADVANCE
•
Move the cursor to "DATE" and press, "ENTER". The screen will show the following options
DATE
FORMAT
DAYLIGHT SAVING
D D A A T T
12 - MAY - 2006 16:30:00
D-M-Y
ON
LEFT
E E
3
UP
RIGHT
DOWN