Fortec Star INNOVATION User Manual page 9

Hd digital satellite system
Table of Contents

Advertisement

DO NOT STACK ANY HEAVY ITEMS ON THE RECEIVER.
DO NOT CONNECT OR MODIFY CABLES WHEN THE RECEIVER IS PLUGGED IN.
PRECAUTIONS
This Set Top Box (STB) has been manufactured to meet international safety standards, including
those set by the FCC and Underwriters Laboratories (cUL). Please read the following safety
precautions carefully before handling the STB.
POWER
REQUIRED
CABLE
LOCATION
CLEANING
OVERLOADING
VENTILATION
LIQUIDS
SMALL
OBJECTS
ATTACHMENTS
LIGHTNING
SERVICING
10
North American models - Use only 100 -120V AC 60Hz.
Europe / Middle East models - Use 90 - 240V AC 50 / 60Hz
Use standard certified cables to prevent any malfunction of the
STB.
Locate the STB indoors. Locate STB away from potential hazards
such as excessive moisture. STB should not be subjected to
direct sunlight, excessive heat or power surges.
1. Always disconnect the STB power cord from the wall socket
before cleaning it.
2. Use a lightly dampened cloth to clean the exterior of the STB.
(Use no solvents.)
Do not overload wall outlets, extension cords or adapters. This
can cause a fire or electrical shock.
1. NEVER block ventilation slots of the receiver.
2. NEVER stand the STB on soft furnishings or carpets.
3. Ensure that a free airflow is maintained around the STB.
4. Do not use or store the STB where it is exposed to direct
sunlight or near a heater.
5. NEVER stack other electronic equipment on top of the STB.
Keep liquids away from the STB.
Coins or other small objects must be kept away from the STB.
They can fall through ventilation slots of the STB and cause
serious damage.
Do not use any attachments that are not recommended. These
may cause hazards or damage the equipment.
The STB must remain connected at all times to the main power
supply. However, Manufacturer's instructions for safeguarding
other equipment connected to the STB, TV set, etc., should be
followed during lightning storms.
1. Do not attempt to service this product yourself.
2. Refer all servicing to qualified service representatives.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents