Advanced Scan Function - Fortec Star INNOVATION User Manual

9.3.3 Advanced Scan Function

•
To access the Advanced Scan menu from the
Antenna Setup, press the WHITE button on the
remote control.
•
In this menu, you can scan a specific transponder
from the list.
•
You can scan a new transponder as well by adding its
frequency, symbol rate, and polarity.
•
Select the satellite by using the /
from the list and confirm the selection with OK.
•
Select the TP by using
list and confirm the selection with OK.
•
If you need to search for a TP which is not in the data,
input a proper frequency using NUMERIC buttons.
Symbol Rate: Input a proper symbol rate if
o
needed using the Numeric buttons.
DVB Standard: Select the DVB Standard of
o
the TP (DVB-S or DVB-S2) using
Please refer to following table for selection for
o
Modulation, FEC, Pilot in DVB-S or DVB-S2.
Parameter
Modulation
FEC
Pilot
•
If you know the PID channel information you can scan for a specific channel.
Enter the PID of the channel you want to search.
Set the channel's Video PID using Numeric buttons.
Set the channel's Audio PID using Numeric buttons.
Set the channel's PCR PID using Numeric buttons.
Press the RED button to save.
Press the YELLOW button to start the scan.
Press the MENU button to return to viewing mode or Back(
previous menu.
buttons. Choose
/ buttons. Choose from the
/ buttons.
DVB-S
Disabled
Auto,1/2,2/3,
3/4,5/6,7/8
Disabled
DVB-S2
QPSK
1/2,2/3,3/4,3/5,4/5,
5/6,8/9,9/10
Auto, off, on
) button to return to
8PSK
2/3,3/4,3/5,
5/6,8/9,9/10
Auto, off, on
25