Diseqc 1.2; Usals - Fortec Star INNOVATION User Manual

9.2.2 DiSEqC 1.2

Select Antenna-DiSEqC 1.2 using
Antenna Setup mode.
Press OK to access the DiSEqC 1.2 set up menu.
To define the Set-up limits, press OK on the
corresponding row.
Move East/West: Press
the motor.
East Limit: Press OK button to fix East Limit.
West Limit: Press OK button to fix West limit.
Disable Limits: Press OK button to disable
East/West Limits.
Go to Reference: Press OK button to move the
motor to center (0) position.
Press button to move west or
on the corresponding row. Press OK button to stop.
Nudge East/West: Fine tune the position using
buttons by adjusting 1 step.
Go to Satellite: Press OK button to move to the stored
satellite position.
To recalculate the satellite positions, move to the
corresponding row and press OK button.
Press the RED button on the remote control to save the current settings.

9.2.3 USALS

Select USALS in Positioner Setup and press OK.
Select an active transponder using
Set your Longitude using 0~9 buttons and specify
East/West using
Set your Latitude using 0-9 buttons and specify
South/North using
Move to 'Go to Satellite' and press OK button to move
the motor to the satellite position.
To move the motor to the center (0) position, move the
cursor to the 'Go to Reference' row and press OK.
Press the RED button to save the current setting.
/ buttons in
/ buttons to move
button to move east
button.
/ buttons.
/ buttons.
/
23