Advertisement
Needle / Needle hole guide / Intermediate presser corresponding table
Application
Knit and knitting fabric (option)
Light- to medium-weight (S type)
Medium- to heavy-weight (H type)
Heavy-weight (option)
Heavy-weight
(slide-type thread take-up lever: standard)
Extra heavy-weight (option)
For the prevention of stitch skipping
on heavy-weight materials (option)
S type: Fitting thread numbers #80 #20
1 The needle equipped as standard (DP
SPECIFICATIONS
Specification common to all models
(The machine with a slide-type thread take-up lever AMS-210EN-HL1306/7300 is excluded.)
Max. sewing speed
Stitch length
Needle bar stroke
Lift / Stroke of the intermediate presser
Variable lower position of the intermediate
presser
Needle thread tension
Hook
Storage of pattern data in the memory
Enlarging / Reducing facility
Bobbin thread / Product counter
Lubrication
Lubricating oil
Sewing machine motor
Power requirement / Power consumption
Stitch length is 4mm or less for the AMS-210EN and 3.5mm or less for the AMS-221EN.
"sti/min" stands for "Stitches per Minute."
For CompactFlash™, please use genuine JUKI products.
"CompactFlash™"is a registered trademark of SanDisk Corporation, U.S.A.
Microsoft Windows is a trademark of Microsoft Corporation, U.S.A., registered in the U.S.A. and other countries.
Other company names and product names/brand names are trademarks or registered trademarks of the respective companies.
9
Needle
Part No.
Number
#09 #11
B242621000C
1
#11 #14
B242621000A
2
#14 #18
B242621000B
B242621000D
B242621000F
#18 #25
B242621000G
B242621000H
H type: Fitting thread numbers #50 #2
×
5 #14)
2 The needle equipped as standard (DP
Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
External media: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
1 400% 0.1% step , Pattern enlargement / reduction can be done by increasing /
Needle hole guide
Needle hole diameter
1.6
1.6
2.0
2.4
3.0
3.0 (with counterbore
3.0 (with eccentric
×
17 #18)
2,800sti/min
0.1 12.7mm (0.05mm step
41.2mm
Lifting amount: 20mm / Stroke: Standard 4mm (0 10mm
Standard 0 3.5mm (max. 0 7.0mm
Active tension (electronic thread tension control mechanism)
Double-capacity shuttle hook
decreasing either stitch length or the number of stitches
Up / Down system (0 9,999)
Semi-dry / hook section: minute-quantity lubrication (tank system)
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
AC servomotor 550W (direct-drive system)
Single-phase, 3-phase 200 240V/450VA
Intermediate presser
×
Part No.
Dimensions ( A
×
×
1.6
2.6
5.7
×
×
2.2
3.6
5.7
×
×
2.2
3.6
8.7
×
×
2.7
4.1
5.7
×
×
3.5
5.5
5.7
A
H
B
Intermediate presser
× ×
B
)
×
37.0
×
38.5
×
41.5
×
38.5
×
38.5
L
Advertisement
