Advertisement
Device/Parts
AMS-210EN
Series
Description
Pneumatic inverted clamp device
Needle cooler asm.
AMS-210EN pneumatic set
Side wiper asm.
Relay cable asm. for the side wiper
One-touch utility clamp
Exclusive to the monolithic feeding frame
One-touch utility clamp
Exclusive to the separately-driven feeding frame
Cassette holder asm.
Cassette holder fixing base asm.
Mechanical valve unit
Bar-code reader
Transformer for the single-phase high-voltage
power supply
AMS-221EN
Series
Description
Side wiper asm.
Relay cable asm. for the side wiper
Needle cooler asm.
Cassette holder asm. for 2516
Cassette holder fixing base asm. for 2516
Cassette holder asm. for 3020
Cassette holder fixing base asm. for 3020
One-touch utility clamp
Bar-code reader
Transformer for the single-phase high-voltage
power supply
Cassette holder
Part No.
The model is best-suited to circular sewing, for attaching small patches such
as labels and emblems.
40092951
For the S type (motor-driven feeding frame), the AMS-210EN pneumatic
set is required.
It blows air on the needle to prevent thread breakage due to heat.
40092717
For the S type (motor-driven feeding frame), the AMS-210EN pneumatic
set is required.
(40035692)
(To use the side-sweeping wiper, part number 40035692 should be ordered.)
The pneumatic set is required when the S type (motor-driven feeding frame)
40089848
uses pneumatic inverted clamp device and needle cooler.
40035867
A side wiping type is also available depending on the sewing products or
sewing conditions.
B4150210DA0
40089692
The feeding frame and the feed plate can be quickly changed without any
tools.
40089695
The next material to be sewn can be placed between the top and bottom
B2953210DA0
plates of the cassette holder while the machine is still engaged in the
B2594210DA0
sewing of the currently set material.
It is possible to make up and down movements same as manual pedal.
40042352
Not available to S type machine head.
So as to prevent any accidents that may be caused when the feeding
40089238
frame does not match a program, a program which matches the feeding
frame can be invoked by reading the bar-code.
The transformer is required when the sewing machine is used in a
40005422
high-voltage area (380V/400V/415V).
Part No.
40035867
A side wiping type is also available depending on the sewing products or
sewing conditions.
40036668
It blows air on the needle to prevent thread breakage due to heat.
40092717
(To use the side-sweeping wiper, part number 40035692 should be
(40035692)
ordered.)
B25822210A0
The next material to be sewn can be placed between the top and bottom
40052328
plates of the cassette holder while the machine is still engaged in the
40053777
sewing of the currently set material.
40053782
The feeding frame and the feed plate can be quickly changed without any
tools.
40052330
The one-touch utility clamp has been specifically designed for Area Code
2516.
So as to prevent any accidents that may be caused when the feeding
frame does not match a program, a program which matches the feeding
40089238
frame can be invoked by reading the bar-code.
The transformer is required when the sewing machine is used in a
40005422
high-voltage area (380V/400V/415V).
One-touch utility clamp
Feature
Exclusive part for sewing area code 1306(X:1306mm-Y:60mm)
Parts for any area other than the above are available on special order.
Feature
Bar-code reader
8
Advertisement
