Low Battery Indication; Battery Replacement - Extech Instruments EX310 User Manual

BATTERY INSTALLATION and LOW BATTERY INDICATION
WARNING: To avoid electric shock, disconnect the test leads from any source
of voltage before removing the battery cover. Do not operate meter unless the
battery is in place.

LOW BATTERY INDICATION

The icon will appear in the lower left-hand corner of the display when the
battery voltage becomes low. Replace the batteries when this appears.

BATTERY REPLACEMENT

1. Disconnect the test leads from the meter.
2. Remove the protective rubber holster. See diagram.
3. Remove the Phillips head screw located on the lower back of the
instrument.
4. Remove the fuse/battery compartment cover to access the battery. See
diagram.
5. Replace the 9V battery observing polarity.
6. Secure the fuse/battery compartment cover using the Phillips head
screw.
7. Place the protective rubber holster on the meter.
You, as the end user, are legally bound (Battery ordinance) to
return all used batteries and accumulators; disposal in the
household garbage is prohibited!
You can hand over your used batteries / accumulators,
gratuitously, at the collection points for our branches in your
community or wherever batteries / accumulators are sold!
Disposal
Follow the valid legal stipulations in respect of the disposal of the
device at the end of its lifecycle
12 Model EX310-EU-ENG – V7.2– 05/2008