Table of Contents
Advertisement
DX-80/120 Cordless Phone User Guide
Status Indicators (continued)
N
L
O
INK TO
If the handset is too far from the base, or if the power of the base unit
is removed for aproximately 30 seconds, the handset displays
NO LINK TO BASE
to indicate that the handset cannot link with the base.
Since the handset is not receiving any information from the base
station, the second and third rows on the display are blank.
The user must get closer to the base, or check the base power status.
The user can also try to re-register the handset to check the
registration status.
R
V
ING AND
IBRATOR
• If you set the status to Ring mode only, the phone displays the
ring (
) icon only on the LCD.
• If you set the status to Vibrator mode only, the phone displays
the vibrator ( ) icon only on the LCD.
• If you set the status to Ring and Vibrator mode, the phone
displays both the ring and vibrator icons on the LCD.
S
M
LEEP
ODE
For power saving issues, the handset enters sleep mode
automatically when there is no special event in the system. The
display will be blank except for the handset extension number.
The user can simply press any key to wake up the unit. The handset
automatically wakes up if it receives any special information from
base.
B
S
ASE
TATUS
NO LINK TO BASE
S
TATUS
((
S
TATUS
NOTE
If the handset in sleep mode, the LEDs are not
turned on.
))
Status Indicators (continued on next page)
- 11 -
O
VERVIEW
Advertisement
Table of Contents
