Removing The Base Grille; Changing The Light Bulbs - Whirlpool ED20ZK Use And Care Manual

No-frost refrigerator-freezer
Hide thumbs Also See for ED20ZK:
Table of Contents

Advertisement

Removing
the base grille
To remove the grille:
1.
Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3.
Do not remove Tech Sheet
fastened
behind the grille.
To replace the grille:
1.
Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions
for defrost pan and
condenser coils on page 20.
Condenser
coils
I
L
Defrost
pan
,\
ts,ubpDpolt
----
grille
Changing
the light
bulbs
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could result in per-
sonal injury.
To change refrigerator light:
1.
Disconnect
refrigerator from power supply.
2. Reach behind the Control Console to
remove bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ed22zr

Table of Contents