Description Of Controls, Displays And Alarms - Garrett PD 6500i User Manual

1.3

DesCrIPTION OF CONTrOLs, DIsPLAYs AND ALArMs

1.3.1 DesCrIPTION OF vIsUAL CONTrOLs AND DIsPLAYs
Figure 1-1
1.3.1.1 BAr GrAPH
The LED bar graph is comprised of a series of lights. The bar graph light activity
represents the level of metal detection intensity occurring within the archway. The
detection intensity is dependent upon the quantity and composition of the metallic object(s),
and the program and sensitivity settings of the unit.
The bar graph also indicates the presence of electrical interference and interference from
nearby moving metallic objects.
1.3.1.2 reADY LIGHT
The green READY light appears when power is on and the PD 6500i is ready to detect
metal. The ready light must be illuminated before a patron is permitted to enter the walk-
through. A rapidly blinking ready light is an indication that AC power has been discon-
nected and the unit is operating on the optional battery backup system.
1.3.1.3 BACKLIT LCD
The LCD is a visual display located in the overhead panel. The LCD reports calibration
and operational information, including program and sensitivity settings, operator functions
and fault indication. The LCD displays all self-prompting regulation and control functions
as well as traffic count information.
1.3.1.4 ALArM LIGHT
The red ALARM light is a visual indication of an alarm when the unit detects a targeted
amount of metal within the walk-through according to the program and base sensitivity
settings. When a target is detected the alarm light appears even if audio volume is off.
1.3.1.5 TOUCHPAD KeY LOCK
Disables touchpad to prevent tampering.
© 2008 Garrett Metal Detectors
PD 6500i User MANUAL
TOUCHPADS
TOUCHPAD KEY LOCK
9 PN 1532010 REV F1