Garrett PD 6500i User Manual page 17

PD 6500i User MANUAL
3. Place the packing insert on floor as shown in Figure 2–2.
Lay detection unit (with touchpad panel facing down) on packing insert. Connect detection
unit to panels A and B using four screws and finishing washers. Do not tighten!
Figure 2-2
4. Connect Panel Cables
Open the door of the detection unit. Connect cables A and B into the corresponding
panels. (See Figure 2–3.)
CABLE RECEPTACLE
PANEL B
PANEL A
Figure 2-3
© 2008 Garrett Metal Detectors 17 PN 1532010 REV F1