Camera Setup; Software Information; Av Input Setup - Kenwood DNX9210BT Instruction Manual

Return to the Top page
Setting Up

Camera Setup

You can set camera parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
78 78
Rear Camera*
1
Selects the type of rear camera to use.
CMOS-310: W hen the CMOS-310/CMOS-300
series with ID 1 set is connected.
Other (Default): W hen the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: S witches to the rear view camera video
display when shifting to reverse or
pressing the <AUD> button for 1 second.
OFF (Default): S witches to the rear view
camera video display when
pressing the <AUD> button for
1 second.
R-CAM Settings* 2
Adjusts the CMOS-310/CMOS-300 series with
ID 1 set. For details, see the instruction manual
of your camera.
Front Camera*
1
Turn this setting on when the CMOS-310/
CMOS-300 series with ID 2 set is connected.
Setting values are ON and OFF. Default is "OFF".
F-CAM Settings*
3
Adjusts the CMOS-310/CMOS-300 series with
ID 2 set. For details, see the instruction manual
of your camera.
*1 T hese settings become settable only when
the parking brake is on.
*2 T his setting becomes settable only when
the parking brake is on and the CMOS-
310/CMOS-300 series is selected.
*3 T his setting becomes settable only
when the parking brake is on and "Front
Camera" is set to [ON].

Software Information

Check the software version of this unit.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Software].
Software Information screen appears.
4
Confirm the software version. Touch
[Update] as necessary.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Return to the Top page
Setting Up

AV Input Setup

You can set AV input parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
iPod AV Interface Use*
1
Sets the terminal which iPod is connected.
Setting values are iPod and AV-IN2. Default is
"iPod".
AV-IN1 Name / AV-IN2 Name* 2
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is "VIDEO".
*1 T his item can be set when in STANDBY
source and also the iPod is disconnected.
*2 [ AV-IN2 Name] becomes settable when
"AV-IN2" is selected in [iPod AV Interface
Use].
79