Camera Setup - Kenwood DNX7180 Quick Start Manual

Return to the Top page
Setting Up

Camera Setup

You can set camera parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
78 78
Rear Camera*
1
Selects the type of rear camera to use.
CMOS-300: When the CMOS-300 with ID 1 set
is connected.
Other (Default): When the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <AUD>
button for 1 second.
OFF (Default): Switches to the rear view
camera video display when
pressing the <AUD>
<SCRN>
for 1 second.
R-CAM Settings*
2
Adjusts the CMOS-300 with ID 1 set. For details,
see the instruction manual of your camera.
Front Camera*
1
Turn this setting on when the CMOS-300 with
ID 2 set is connected. Setting values are ON
and OFF. Default is "OFF".
F-CAM Settings*
3
Adjusts the CMOS-300 with ID 2 set. For details,
see the instruction manual of your camera.
*1 T hese settings become settable only when
the parking brake is on.
*2 T his setting becomes settable only when
the parking brake is on and the CMOS-300
is selected.
*3 T his setting becomes settable only
when the parking brake is on and "Front
Camera" is set to [ON].
or <SCRN>
or
button