Camera Setup; Software Information; Av Input Setup - Kenwood DNX7190HD Quick Start Manual

Return to the Top page
Setting Up

Camera Setup

You can set camera parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
86 86
Rear Camera*
1
Selects the type of rear camera to use.
CMOS-3xx: When the CMOS-300 series with ID
1 set is connected.
Other (Default): When the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <AUD>
or <SCRN>
button for 1 second.
OFF (Default): Switches to the rear view
camera video display when
pressing the <AUD> or
<SCRN> button
for 1 second.
R-CAM Settings* 2
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Front Camera* 1
Turn this setting on when the CMOS-300 series
with ID 2 set is connected. Setting values are
ON and OFF. Default is "OFF".
F-CAM Settings*
3
Adjusts the CMOS-300 series with ID 2 set.
For details, see the instruction manual of your
camera.
*1 T hese settings become settable only when
the parking brake is on.
*2 T his setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
*3 T his setting becomes settable only
when the parking brake is on and "Front
Camera" is set to [ON].

Software Information

Check the software version of this unit.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Software].
Software Information screen appears.
4
Confirm the software version. Touch
[Update] as necessary.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
• [Bluetooth Module Version] is available only
.
Return to the Top page
Setting Up

AV Input Setup

You can set AV input parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
iPod AV Interface Use* 1
Sets the terminal which iPod is connected.
Setting values are iPod and AV-IN2. Default is
"iPod".
AV-IN1 Name/AV-IN2 Name*
2
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is "VIDEO".
*1 T his item can be set when in STANDBY
source and also the iPod is disconnected.
*2 [ AV-IN2 Name] becomes settable when
"AV-IN2" is selected in [iPod AV Interface
Use].
87