Camera Setup - Kenwood DNX893S Quick Start Manual

Setting Up
Registering original image
You can load an image from the connected
USB device and set it for the background
image.
Before operating this procedure, it is
necessary to connect the device which has
the image to load.
1
Touch [User1 Select] or [User2 Select] in
the Background screen.
User Background File Select screen
appears.
2
Select the image to load.
3
Touch [Enter].
The selected image is loaded and the
display returns to the Background screen.
NOTE
• Touching [ ] rotates counter clockwise.
• Touching [ ] rotates clockwise.
NOTE
Playable Media and Files (P.110)
• See
readable image specifications.
86 86

Camera Setup

You can set camera parameters.
1
Press the
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera screen appears.
4
Set each item as follows.
R-CAM Interruption
ON: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
OFF (Default): Select this when no camera is
connected.
Parking Guidelines
You can display parking guidelines to enable
easier parking when you shift the gear to the
for
reverse (R) position.
Default is "ON".
Guideline Setup
If you select [ON] for Parking Guidelines, adjust
the parking guidelines. See
parking guidelines
<MENU> button/
volume knob.
Adjusting the
(P.87).