Specifications - JUKI DDL-9000B Instruction Manual

S : Micro-quantity lubrication
M : Semi-dry
D : Dry

SPECIFICATIONS

-SS
M a x . s e w i n g
speed
Thread trimming
speed
Stitch length
Presser foot lift
(by knee lifter)
*2
Needle
JUKI NEW DEFRIX OIL No. 
Lubricating oil
or JUKI MACHINE OIL #7
SS, MS, MA ;
'- Equivalent continuous emission sound pressure level (L
A-weighted value of 77 dBA ; (Includes K
204 GR2 at 4,000 sti/min.
SH ;
'- Equivalent continuous emission sound pressure level (L
Noise
A-weighted value of 77 dBA ; (Includes K
204 GR2 at 4,000 sti/min.
DS ;
'- Equivalent continuous emission sound pressure level (L
A-weighted value of 79 dBA ; (Includes K
204 GR2 at 4,000 sti/min.
• The sewing speed will vary depending on the sewing conditions. The sewing speed preset at the time of shipping is 4,000sti/
min. The thread trimming speed can be changed within the range of ( ). The thread trimming speed preset at the time of
shipping is 500sti/min.
* 1
: When stitch length exceeds 4 mm or more, set the max. sewing speed to 4,000 sti/min or less for use.
2
*
: Needle used depends on the destination.
3
*
: MA type is for light-weight materials. In the case the sewing machine is used with its speed of stitch set at 4,000 sti/min
or higher, the presser regulating spring and thread tension spring should be changed with S type ones.
DDL-9000B-
-MS
5,000sti/min 4,000 sti/min
500 sti/min (00 to 500sti/min)
5mm
0 mm (standard) 5 mm (max.)
738 Nm65 to 0
(DB× #9 to 8)
34 Nm65 to 0
(DP×5 #9 to 8)
S :
H :
A :
-DS -SH
4,500 sti/min
*
738 Nm25 to 60
(DB× #20 to 23)
34 Nm25 to 60
(DP×5 #20 to 23)
- JUKI NEW DEFRIX OIL No. 
or JUKI MACHINE OIL #7
) at the workstation:
pA
= 2.5 dBA) ; according to ISO 082- C.6.2 -ISO
pA
) at the workstation:
pA
= 2.5 dBA) ; according to ISO 082- C.6.2 -ISO
pA
) at the workstation:
pA
= 2.5 dBA) ; according to ISO 082- C.6.2 -ISO
pA
–  –
Medium-weight materials
Heavy-weight materials
Light weight materials
*3
-MA
5,000 sti/min
4mm
738 SAN0 Nm60 to 75
(DB× SF#8 to )
34 Nm60 to 75
(DP×5 #8 to )