Addressing I/O Modules - Electrolux W465H Service Manual

Addressing I/O modules

After replacing an I/O module or in instances
where a second module has been added to a
washing machine, the new I/O module must be
addressed in order to activate its function op-
tions. The function options of the module are
controlled by the parameter software loaded on
the relevant program device.
• Engage the machine's service mode.
• Highlight the I/O ADDRESS line in the main
18
menu and press the knob.
The display will now show an 8-digit code.
19
• Call authorised service and quote the code.
Authorised service will then assign a pass code.
• Enter the code you have been given and
press the knob.
The I/O ADDRESS menu will appear in the dis-
play.
• Highlight the I/O module to be addressed and
20
press the knob.
• Press the service switch on the I/O module
21
indicated in the display.
• Where multiple I/O modules are to be addres-
sed, repeat the procedure for the relevant
modules.
• Exit the service program.
I/O modules
18
MAIN MENU
08.00.00.00
RESET TO FACTORY
ACTIVATE WASH PROGR.
QUICK START BUTTONS
I/O ADDRESS
PRICE PROGRAMMING
EXIT
19
CODE:
10103554
YOUR PASSWORD
0000
20
I/O ADDRESS
10.00.00.00
I/O BOARD 1
I/O BOARD 2
I/O BOARD 3
I/O BOARD 4
I/O BOARD 5
21
87
6204
6204
6204
6580