Electrolux W465H Service Manual page 62

62
SHOW PROG. COUNTER
Select whether the contents of the machine's counter of completed wash
programs should be shown in the display window while a wash program is
in progress or outside the wash program without going into service mode.
The counter is shown on the display after pressing the control knob twice
in quick succession.
Yes = The contents of the program counter can be displayed if a time has
been set for the function
No = No display of the contents in the counter.
BUTTON CLICK
Select whether the machine should give a sound for each new position
when the knob is turned and pressed in.
Yes = Sound.
No = No sound.
FLASH LIGHT ON
Select whether the output for the flash light is to be activated while the
buzzer is activated during a wash program. The output is on all the time
and becomes inactive when the buzzer is turned off.
Yes = Flash function on.
No = Flash function off.
HEAT ERROR ON
Select whether the HEAT ON fault code should be displayed when the
machine is heating up too slowly.
Yes = The fault code is displayed.
No = The fault code is not shown.
SHOW MODULE NUMBER
Select whether the washing module number should be shown while a
wash program is being used.
The washing module number will always be shown during rapid advance,
however.
Yes = The module number is displayed.
No = The module number is not shown.
Program unit
SHOW.STAT.DOUBLECLI.