Engaging Servicemode - Electrolux W465H Service Manual

24

Engaging servicemode

Service mode is engaged by using one of the
following alternative:
Alt. 1 Service switch on the CPU board under
the top cover on the front of the machine.
Alt. 2 Service switch on the I/O board at the
rear of the machine to the right of the
electrical connection.
Alt. 3 Service switch on the CPU card will be
activated via a link arm which can be ac-
cessed from the front below the top front
panel. (On machines with coin counting
only.)
Press the service button about 2 sec.
2
The machine software will now switch to its
3
service mode. The display lists the submenus
available in this mode.
This service manual describes the functions
and programming instructions for the following
submenus:
• SERVICE
• CONFIG 1
• ACTIVATE WASH PROGR.
• I/O ADDRESS
For other submenus, please refer to the pro-
gramming manual.
To save changes to the machine's flash memory,
4
they must be confirmed in a menu that is dis-
played automatically whenever a change has
been made and you are exiting the menu.
Troubleshooting
2
Alt. 1
6580
Alt. 3
3
MAIN MENU
01.00.00.00
SERVICE
PARAMETER PROG
STATISTICS
CONFIG 1
CONFIG 2
4
SAVE TO MEMORY
YES
6582
Alt. 2
6638
6204
6204