Repairs - Electrolux W465H Service Manual

114

Repairs

Repair work on the machine should only be
done by specially trained personnel.
Replacing the heating elements
Wen replacing the heating elements, there
is a risk that water still left in the machine
may flood onto the floor. Be sure to dry up
any spilled water since it may cause people
to slip and hurt themselves.
1. Take down power from the machine.
2. Remove the front cover.
3. Make a note of how the heating elements are
connected.
4. Disconnect the connection to the heating
5
element to be replaced.
5. Unscrew the nut between the connections
approx. 1 cm.
6. Push on the nut and bolt to undo the expan-
sion bracket from the outer drum.
7. Remove the old heating element and install
the new one. Be sure that the rear edge is
fitted into the element holder at the rear of the
outer drum.
8. Assemble in reverse order.
Heating
5
Heating element
Temperature sensor
5204