Adjustments - Shoprider EZ Chopper S8M User Manual

ADJUSTMENTS

Handlebar Adjustment (Fig 2)
The handlebar angle may be adjusted farther or
closer to the seat. To adjust, loosen the nut that
secures the tiller control head. Push the tiller
control head to the left side. Loosen the hex bolt
nut and move the handlebars to the desired
position. Tighten the hex bolt nut securely. Push
the tiller control head back into place and tighten
nut.
Arm Rests (Fig 3)
Arm rests can be pushed up and out of the
way. Hold the end of the arm rest and pull
upwards. This makes for clear easy transfers
in and out of the seat. Push arm rest back
down into position.
5/18/2007 7
Hex Bolt Nut
Tiller Control
Head Nut
Figure 2
Figure 3