Samsung Plasma TV User Manual page 37

 Timer 1 / Timer  / Timer 
You can set the On/Off timers so that the television will switch
on or off automatically at the time you select.
☛
You must set the clock first.
− Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied.
• On Time : Select hour, minute, and Inactivate/Activate.
(To activate timer with the setting satisfied, set to
Activate.)
• Off Time : Select hour, minute, and Inactivate/Activate.
(To activate timer with the setting satisfied, set to
Activate.)
• Volume : Select the required volume level.
• Antenna : You can select either Air or Cable when the TV
turns on automatically.
• Channel : You can select the channel to be played when
the TV turns on automatically.
• Repeat : Select Once, Everyday, Mon~Fri, Mon~Sat, or
Sat~Sun, Manual.
When Manual is selected, Press the ► button to
➢
select the desired day of the week. Press the
ENTER button over the desired day and the mark
( ✓ ) will appear.
➢
You can set the hour, minute, directly by pressing the number buttons on the remote control.
☛
Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
English - 
Timer 1
On Time
00 00
Off Time
12 00
Volume Antenna
10 ATV
Repeat Sun Mon Tue Wed The Fri
Once
Move Adjust Enter
Inactivate
Inactivate
Channel
1
Sat
Return