Selecting the Sound Mode (depending on the model)
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either "DUAL-I" or "Stereo", depending on the
current transmission.
Easy Setting
1
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select Dual I-II.
Press the ◄ or ► button to select the required option.
Type of broadcast
Regular broadcast
(Standard audio)
Regular + NICAM
Mono
NICAM
Stereo
NICAM-Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A
Zweisprachig oder
Stereo
Dual-I/II
Stereo
➢
►
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
►
If the stereo signal is weak and automatic switching occurs, switch to Mono.
This function is only available in Analog TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without
disturbing other people in the room.
➢
When you insert the head set jack into the corresponding port, you
can operate only
DTV : Audio Language, Audio Format, TV Speaker, Sound
Reset
ATV : TV Speaker, Sound Reset
PIP : Sound Select
➢
Prolonged use of headphones at a high volume may damage your
hearing.
➢
You will not hear sound from the speakers when you connect
headphones to the TV.
➢
The headphone volume and TV volume are adjusted separately.
On-screen indication
Mono (Normal use)
↔
NICAM
NICAM
↔
Stereo
NICAM
NICAM
→
→
Dual-1
Dual-
Mono (Normal use)
↔
Dual I
↔
Stereo
English - 4
Device List
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual I II
Mono
(Normal)
Mono
(Normal)
Mono
(Normal)
Dual II
Mono
(Forced mono)
TOOLS
: Standard
: Standard
:
Off
:
Off
:
Off
◄ Mono ►
Move
Adjust
Exit
TV Side Panel