Using the WISELINK Function
This function enables you to view and listen to photo (JPEG)
and audio files (MP3) saved on a USB Mass Storage Class
Press the POWER button on the remote control or front
The TV is powered on.
Connect a USB device containing JPEG and/or MP3 files
to the WISELINK jack (USB jack) on the side of the TV.
If you enter the WISELINK mode with no USB device
connected the message "No external storage device
found. Check the connection status." will appear. In this case, insert the USB device, exit
the screen by pressing the W.LINK button on the remote control and enter the WISELINK
MTP (Media Transfer Protocol) is not supported.
The file system only supports FAT16/32 (The NTFS file system is not supported).
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Wiselink only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage
Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card
Readers (Both USB HDD and HUB are not supported.)
Please connect directly to the USB port of your TV. If you are using a separate cable
connection, there may be a USB Compatibility problem.
Before connecting your device to the TV, please back up your files to prevent them from
damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
Do not disconnect the USB device while it is loading.
MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
The sequential jpeg format is supported.
Photo and audio files must be named in English, French or Spanish. If not, the files can not
be played. Change the file names to English, French or Spanish if necessary.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360x8640 pixels.
For unsupported or corrupted files, the "Not Supported File Format" message is displayed.
English - 45
TV side Panel