Samsung Plasma TV User Manual page 31

Positioning and Sizing the screen using Zoom
− Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down
direction using the ▲ or ▼ button as well as the screen size.
− Move the screen up/down using the ▲ or ▼ button after selecting the
button.
− Resize the screen vertically using the ▲ or ▼ button after selecting the
button.
 Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
➢
When the signal is weak, select one of the other
options until the best picture is displayed.
 DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a
high visual quality. If you set DNIe to on, you can view
the screen with the DNIe feature activated. If you set the
DNIe to Demo, you can view the applied DNIe and normal
pictures on the screen, for demonstration purposes. Using
this function, you can view the difference in the visual quality.
➢
DNIe (Digital Natural Image engine)
TM
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe
eyes.
➢
This function is available only in Dynamic mode.
 HDMI Black Level: Normal/Low
Using this function, you can adjust the image quality when the screen burn (appearance of black
level, low contrast, low colour, etc.) is encountered by the HDMI input for RGB limited range (16 to
235).
➢
This function is active only when the external input connects to HDMI(RGB signals).
 Movie Plus: Off/Low/Medium/High/Demo
You can view more natural skin and clear text even in fast moving scenes.
➢
Use this function when watching movies.
➢
This function is not available in Wide Zoom and Zoom modes.
➢
This function is not available when PIP is set to On.
➢
It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.
 Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/ Cyan/Magenta/ Yellow Colour Bar Patterns,
without using an additional Blue Filter.
➢
Blue Only Mode is available when the picture mode is set to Movie or Standard.
Colour Tone
Size
Digital NR
DNle
HDMI Black Level
Movie Plus
Blue only mode
technology will fit every signal into your
TM
English - 0
by pressing the ◄ or ►
by pressing the ◄ or ►
Picture Options
: Normal
: 16:9
:
Off
: 2min
Low
: 2min
Medium
: Off
High
: Off
Auto
Move Enter Return