Download  Print this page

Resetting The Picture Settings To The Factory Defaults - SAMSUNG Plasma TV User Manual

Series 6 plasma tv.
Hide thumbs

Advertisement

 Screen Burn Protection
To reduce the possibility of screen burn, this unit is
equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down
(Vertical Line) and side to side (Horizontal Dot). The Time
setting allows you to program the time between movement
of the picture in minutes.
− Pixel Shift: Using this function, you can minutely move
pixels on the PDP in horizontal or vertical direction to
minimize after image on the screen.
− Set Pixel Shift to On by pressing the ▲ or ▼ button,
then press the ENTER button.
− Select the required option by pressing the ▲ or ▼
button, then press the ENTER button.
Available options: Horizontal Dot, Vertical Line,Time
Optimum condition for pixel shift;
Horizontal Dot
Vertical Line
Time (minute)
This function is not available in the Just Scan mode.
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
− All White: This function helps remove after images on the screen by changing the colour of
pixels to white. Use this function when there are remaining after images or symbols on the screen
specially when you displayed a still image on the screen for a long time.
− Scrolling: This function helps remove after images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
− Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
To remove after images on the screen, use either White or Scrolling function. Although both of the
two functions remove after images on the screen, Scrolling is more effective.
The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution
of the function, repeat the function again.
Press any button on the remote control to cancel this feature.

Resetting the Picture Settings to the Factory Defaults

You can set detailed picture settings.
1
Press the MENU button to display the menu.

Press the ENTER button to select Picture.

Press the ▲ or ▼ button to select Picture Reset, then
press the ENTER button.
4
Press the ▲ or ▼ button to select OK or Cancel then
press the ENTER button.
Each mode can be reset.
PC
TV/AV/Component/HDMI
4
4
4
4
4
2 min
English - 1
Screen Burn Protection
Pixel Shift
All White
Scrolling
Side Gray
: Dark
Move
Enter
Pixel Shift
Pixel Shift
: On
Horizontal Dot
: 4
Vertical Line
: 4
Time
: 2 min
Move
Enter
Detailed Settings
Picture Options
Picture Reset
OK
Cancel
Return
Return

Advertisement

Table of Contents

   Also See for SAMSUNG Plasma TV

   Related Manuals for SAMSUNG Plasma TV

This manual is also suitable for:

Ps50a650Ps58a650

Comments to this Manuals

Symbols: 0
Latest comments: