Aztech DSL8800GR Easy Start Manual page 5

For Fibre Subscribers, kindly follow the steps provided below. You may
also use the diagram provided as reference:
a. Using an Ethernet cable
included in the package,
connect your Ethernet device
to your DSL8800GR(S) router
through both of the devices'
available Ethernet ports.
b. Connect another Ethernet
cable to the Ethernet port of
your ONT, and its other end
to the Ethernet port of your
DSL8800GR(S) router.
c. Connect the power adapter
of your DSL8800GR(S) and
plug the power adapter to
the power outlet.
d. Turn ON
device.
your Ethernet
LED CHECK:
Please wait for approximately 5 minutes. The
POWER and the BROADBAND LEDs should now be
in stable GREEN (not blinking), if not, kindly check
if all steps have been done correctly. It is strongly
advised NOT to proceed to the next section unless
the LED behaviors work as suggested.
DSL8800GR(S) EASY START GUIDE DSL8800GR(S) EASY START GUIDE
DSL8800GR(S)
a
Desktop/PC
b
ONT
NOTE: Ensure that your ONT device
is already plugged.
Power
Adapter
c
5