Assembly Instruction - Impex Competitor WM-203 Owner's Manual

ASSEMBLY INSTRUCTION

Tools required assembling the machine: Two Adjustable Wrenches.
NOTE: It is strongly recommended two or more people assembling this equipment to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#2) in the mid-span.
Secure them with two M10 x 2 ¾" Hex Bolts (#38), one Bracket (#16), two
Washers (#44), and two M10 Aircraft Nuts (#47) on each end of the Cross Brace.
B.) Insert the Backrest Adjustment Bar (#8) through a selected hole on the Rear Upright
Beams to obtain desired incline of Backrest.
C.) Insert Left & Right Bar Catches (#6) & (#7) into the selected holes on the Rear Upright
Beams to obtain the desired height to hold the weight bar.
5
¾"
DIAGRAM 1