Table of Contents
Advertisement
ASSEMBLY INSTRUCTION
• Tools Required for Assembling the Machine: One Crossing Wrench and Allen Wrench,
provided by manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP 1
Attach the front stabilizer (2) to the main frame (5). Secure using four allen bolts (11), Four curve
washers (10).
STEP 2
Insert sensor wire (7) and computer wire (74) into and pull out through the top of the front post (51).
Attach front post (51) to Main frame (5) and secure with one set of allen bolts (11) & curved
washers (10) and from the sides with two sets of allen bolts (11) and flat washers (3).
© IMPEX INC.
5
11
10
2
74
5
11
10
51
11
10
3
3
11
7
6
www.marcypro.com
Advertisement
Table of Contents
