Impex Competitor WM-203 Owner's Manual page 9

STEP 4 (See Diagram 4)
A.) Attach the Backrest Supports (#14) onto both ends of the Pivot on the Main Seat
Support (#3). Place the other end rest against the Backrest Adjustment Bar (#8).
B.) Place the Backrest Board (#17) onto the Backrest Supports. Secure it with four M6 x 1
½" Hex Bolts (#43) and
C.) Place the Seat Pad (#18) onto the bracket on the Main Seat Support (#3). Align the
holes and secure it with four M6 x 1 ½" Hex Bolts (#43) and
D.) Attach the Arm Curl Pad (#19) to the Arm Curl Stand (#15). Secure it with two M8 x ¾"
Hex Bolts (#41) and Ø 5/8" Washers (#45).
E.) Insert the Arm Curl Stand into the opening on the top of the Front Stabilizer (#5). Use a
Lock Knob (#37) to secure it at desired height.
½" Washers (#46).
½" Washers (46).
DIAGRAM 4