Assembly Instruction - Impex Marcy Pro NS-607RW Assembly & Owners Manual

.

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: One Crossing Wrench and Allen Wrench,
.
provided by manufacturer.
NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP-1
1. Flip the Slide Rail (#3), the Rear Stabilizer (#2) and the seat (#36) up-side-down as shown.
2. Slide the seat (#36) onto the rail (#3). Attach Limiter Pad (#35) to the Slide Rail (#3) and secure
with two screws (#83).
3. Attach the Rear Stabilizer (#2) to the Slide Rail (#3), tighten with 4 Washers (#71) and 4 Hex
bolts (#66).
© IMPEX INC.
3
# 35 Limit pad 1pc
# 66 M8*⅔" 4pcs
# 83 M6*⅔" 2pcs
#71 Φ¾" 4pcs
# 89 S13-17
2
66
71
83
35
6
66
71
36
www.marcypro.com