Impex Competitor WM-203 Owner's Manual page 7

STEP 2 (See Diagram 2)
A.) Connect the Front Stabilizer (#5) to the Main Seat Support (#3) and secure them with
three M8 x ¾" Hex Bolts (#41) and Ø 5/8" Washers (#45). DO NOT tighten the nuts
and bolts yet.
B.) Connect the Main Seat Support to the Cross Brace (#2). Secure it with two M10 x 2 1/8"
Bolts (#39), ¾" Washers (#44), and M10 Aircraft Nuts (#47). DO NOT tighten the
nuts and bolts yet.
C.) Connect one end of the Diagonal Support (#4) to the Main Seat Support (#3). Secure it
with one M8 x 2 1/8" Hex Bolt (#42),
Connect the other end to the Front Stabilizer (#5). Secure it with one M8 x ¾" Hex Bolt
(#41) and 5/8" Washer (#45).
D.) Securely tighten all the nuts and bolts previously installed.
5/8" Washer (#45) and M8 Aircraft Nut (#48).
6
DIAGRAM 2