Assembly Instructions - Impex MARCY NS-716R Owner's Manual

ASSEMBLY INSTRUCTION
• Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench,
provided by manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP-1
A.) Do not tighten Bolts until instructed to do so.
B.) Insert the Sliding Frame (#23) into the Main Frame (#1). Thread the Quick Release Knob (#24) through
selected hole on Main Frame into Sliding Frame to lock it in position. Thread a Leverage Knob (#20)
into the Sliding Frame from bottom.
C.) Attach the Front Stabilizer (#14) to the Main Frame (#1). Secure it with two M8 x 2 3/8" Carriage Bolts
(#13), two Ø 5/8" Curved Washers (#9), and two Acorn Nuts (#19).
D.) Attach the Rear Stabilizer (#27) to the Sliding Frame (#23). Secure it with two M8 x 2 3/8" Carriage
Bolts (#13), two Ø 5/8" Curved Washers (#9), and two Acorn Nuts (#19).
E.) Securely tighten all Bolts.
STEP 2
© IMPEX INC. 6