Assembly Instructions - Impex MARCY MP-3205 Owner's Manual

ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches, two Allen
Wrenches, and one Philips Screwdriver. NOTE: It is strongly recommended this machine
be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Push two Ø 2 3/8" x 1" Rubber Bumpers (#43) onto the Guide Rods (#13) from the bottom.
Insert the Guide Rods into the holes on the Rear Base Frame (#2). The Guide Rods have
holes on the rods about 2/3 way down the rods: for locking the weight stack when not in
use. The shorter end of the Guide Rod with the lock holes need to be pointed
downwards towards the Rear Base Frame.
B.) Secure them with two M10 x 1" Allen Bolts (#73) and two Ø ¾" Washers (#84) from the bottom
of the Rear Base Frame.
C.) Do not tighten Nuts and Bolts starting from next step until instructed to do so.
D.) Attach the Heavy Bag Base Frame (#99) to the Rear Base Frame (#2). Secure it with two M10
x 2 ¾" Carriage Bolts (#80), one 4 3/8" x 3" Bracket (#29), two Ø ¾" Washers (#84), and two
M10 Aircraft Nuts (#83).
7