Impex MARCY PLATINUM MP-2500 Owner's Manual
  1. Manuals
  2. Brands
  3. Impex Manuals
  4. Home Gym
  5. MARCY PLATINUM MP-2500
  6. Owner's manual

Impex MARCY PLATINUM MP-2500 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Model
MP-2500
Retain This
Manual for
Reference
11-06-07
OWNER'S
MANUAL
MARCY PLATINUM
MP-2500 HOME GYM
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
®
IMPEX
INC.

Advertisement

Table of Contents
loading

Related Manuals for Impex MARCY PLATINUM MP-2500

Summary of Contents for Impex MARCY PLATINUM MP-2500

  • Page 1 MP-2500 HOME GYM Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model MP-2500 Retain This Manual for Reference 11-06-07 OWNER'S MANUAL ® IMPEX INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com info@impex-fitness.com...

  • Page 2: Table Of Contents

    ORDERING PARTS..................30 BEFORE YOU BEGIN Thank you for selecting the MARCY PLATINUM MP2500 HOME GYM by ® IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction.

  • Page 3: Important Safety Notices

    PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
  • Page 4 WARNING LABEL REPLACEMENT The warning labels shown here have been placed on the Rear Stabilizer and Upper Frame. If the labels are missing or illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location shown.

  • Page 5: Hardware Pack

    HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
  • Page 6 HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
  • Page 7 HARDWARE PACK...

  • Page 8: Assembly Instructions

    ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Insert two Guide Rods (#17) into the holes on the Rear Stabilizer (#2). Secure each Guide Rod with one M10 x ¾”...
  • Page 9 DIAGRAM 1...
  • Page 10 STEP 2 (See Diagram 2) A.) Attach the Upper Frame (#15) onto the two Guide Rods (#16). Secure it with two M10 x ¾” Allen Bolts (#85) and ¾” Washers (#93). DO NOT tighten the Bolts yet. B.) Place the Upper Frame onto the Vertical Frame (#5). Secure it with two M10 x 2 5/8” Carriage Bolts (#90), one 2 ¾”...
  • Page 11 STEP 3 (See Diagram 3) A.) Attach the Butterfly Base (#13) to the Upper Frame (#15) and the Stopper Frame (#14). Secure it to the Upper Frame with two M10 x 2 5/8” Carriage Bolts (#90), one 2 ¾” x 4 ¾”...
  • Page 12 STEP 4 (See Diagram 4) A.) Attach the Butterfly Pulley Bracket (#19) to the Vertical Frame (#5). Secure it with one M10 x 3 ½” Allen Bolt (#80), two Ø ¾” Washers (#93), and one M10 Aircraft Nut (#92). B.) Attach two Swivel Pulley Brackets (#10) to the Butterfly Pulley Bracket. Secure each Swivel Pulley Bracket with one M10 x 2 ½”...
  • Page 13 STEP 5 (See Diagram 5) A.) Attach the Right & Left Front Press (#7 & #8) onto the Main Base Frame (#1) from both sides. B.) Align the holes. Insert a Front Press Axle (#31) through the holes. Secure the Axle with one Ø1”...
  • Page 14 STEP 6 (See Diagram 6) A.) Secure the Right Front Press (#7) and the Left Front Press (#8) together with two M10 x 2 ½” Allen Bolts (#81), four Ø ¾” Washers (#93), and two M10 Aircraft Nuts (#92). B.) Attach one Front Press Handle (#20) to the holes on the Right Front Press (#7). Secure it with two M10 x ¾”...
  • Page 15 Step 7 (See Diagram 7) A.) Insert the axle on the Right Butterfly (#11) through the holes on the Butterfly Base (#13). Cover the axle with a Lock Ring (#44). Secure the Lock Ring to the axle with one M6 x 1 ¼” Allen Bolt (#91) and M6 Aircraft Nut (#95). B.) Push a Butterfly Large Foam Roll (#49) onto the Right Butterfly.
  • Page 16 STEP 8 (See Diagram 8 & Upper Cable Loop Diagram) A.) Attach the 108” Upper Cable (#38) to the opening on the front of Upper Frame (#15). Make sure the ball stopper is underneath the Frame. Attach a Pulley (#65) to the Cable. B.) Secure the Pulley to the opening with one M10 x 3 3/8”...
  • Page 17 Upper Cable Loop Diagram...
  • Page 18 STEP 9 (See Diagram 9 & Butterfly Cable Loop Diagram) A.) Clip one end of the 100” Butterfly Cable (#36) onto the Right Butterfly (#11). B.) Draw the Cable to the right open Swivel Pulley Bracket (#10). C.) Attach a Pulley (#65) to the Bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#82), two Ø...
  • Page 19 Butterfly Cable Loop Diagram...
  • Page 20 STEP 10 (See Diagram 10-1,10-2,10-3, & Lower Cable Loop Diagram)) A.) Attach the 251” Lower Cable (#37) to the open bracket on the Lower Pulley Base Frame (#3). Attach a Pulley (#65) to the bracket. (See Diagram 10-1). B.) Secure the Pulley with one M10 x 1 ¾” Allen Bolt (#82), two Ø ¾” Washers (#93), and one M10 Aircraft Nut (#92).
  • Page 21 DIAGRAM 10-1...
  • Page 22 DAIGRAM 10-2...
  • Page 23 DAIGRAM 10-3...
  • Page 24 Lower Cable Loop Diagram...
  • Page 25 Step 11 (See Diagram 11-1, 11-2, 11-3, 11-4, & Front Press Cable Loop Diagram) A.) Attach the 121” Front Press Cable (#39) to the small tube on the bottom right side of the Vertical Frame (#5). Align the holes then insert a M10 x 5 ½” Allen Bolt (#79) through a Ø...
  • Page 26 DIAGRAM 11-1 DIAGRAM 11-2...
  • Page 27 DIAGRAM 11-3 DIAGRAM 11-4...
  • Page 28 Front Press Cable Loop Diagram...

  • Page 29: Weight Resistance Chart

    WEIGHT RESISTANCE CHART WEIGHT PLATE Station Lat Pull Butterfly Front Press Low Pulley Leg Developer *Numbers are approximate. Actual weight may vary. *Numbers are approximate. Actual weight may vary. *Numbers are approximate. Actual weight may vary. *Numbers are approximate. Actual weight may vary. *Value for butterfly is for each arm.

  • Page 30: Parts List

    PARTS LIST KEY NO. DESCRIPTION Q’ty Main Base Frame 2” x 2 ¾” End Cap Rear Stabilizer Ø 1” End Cap Low Pulley Base Frame 2” End Cap Seat Support Frame 1” x 2” End Cap Vertical Frame Ø 7/8” x 1” Pulley Bushing Leg Developer Ø...

  • Page 31: Warranty

    IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.

Table of Contents