Table of Contents
Advertisement
ASSEMBLY INSTRUCTION
Tool Required for Assembling the Machine: Allen Wrench and Crossing Wrenches
NOTE: It is strongly recommended that two or more people assemble this machine to avoid
possible injury.
STEP 1
(See Diagram 1)
A.) Do not fasten Bolts until instructed to do so.
B.) Slide the Front Cross Tube (#21) onto the front of the Right and Left Base (#8 & #22). Secure
each end of the Front Cross Tube with one M10 x 2" Allen Bolt (#6) and one Ø 1" x Ø 3/8" Curved
Washer (#7).
C.) Repeat the procedure B above to install the Rear Cross Tube (#28) and Middle Cross Tube (#29)
onto the Right and Left Base.
5
DIAGRAM 1
Advertisement
Table of Contents
