Advertisement
ASSEMBLY INSTRUCTION
Tools Required for Assembling this Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended that two or more people assemble
this machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Connect the Right & Left Upright Beam (#1 & #2) by a Cross Brace (#3) in the Mid-span.
Secure each end of the Cross Brace with two M8 x 2 ½" Hex Bolts (#21), one 1 ¾" x 2
¾" Bracket (#10), four ∅ 5/8" Washers (#27), and two M8 Aircraft Nuts (#29).
C.) Place the Backrest Adjustment Bar (#7) onto the selected on the Upright Beams to
obtain the desired backrest incline.
5
DIAGRAM 1
Advertisement
