Impex GD-700 Owner's Manual page 9

Step 4 (See Diagram 4)
A.) Attach the Upright Stand (#25) to the bracket on the Rear Cross Tube (#28). Secure it with
one M8 x 5/8" Hex Bolt (#16), one Ø 5/8" Washer (#18), and one M8 Aircraft Nut (#19).
Note: Do not over tighten the Nut and Bolt. The Upright Stand needs to be able to
move smoothly.
B.) Turn the Upright Stand stands on floor or horizontally under Middle Cross Tube (#29) to set
up various Lounge Rocker position.
8
DIAGRAM 4