Impex GD-700 Owner's Manual page 7

Step 2 (See Diagram 2)
A.) Do not fasten Bolt until all six M8 x 2" Allen Bolts (#2) are installed.
B.) Place the Lounge Bed (#1) onto the six upright posts on the Right and Left Base (#8 & #22).
Align the holes on the Lounge Bed Frame (#4) to the holes on the six upright posts.
C.) Secure each hole on the Lounge Bed to each upright post with one M8 x 2" Allen Bolt (#2)
and one Ø 7/8" x 5/16" Curved Washer (#3).
D.) Securely fasten all Bolts installed in Procedure C.
6
DIAGRAM 2