Specifications - Follett HCC1000A Operation And Service Manual

Specifications

Electrical
Each icemaker requires its own separate circuit with electrical disconnect within 10 ft (6m).
Equipment ground required.
Standard electrical – 208-230/60/1
Maximum icemaker fuse – 15 amps each
Amperage – 11 amps
6 ft (2m) NEMA 6-15 cord and plug provided on icemaker
Plumbing
3/8" OD push-in water inlet
3/4" MPT drain
1/4" FPT condenser inlet (water-cooled condenser only)
1/4" FPT condenser drain (water-cooled condenser only)
Notes: 3/4" vented drain line must slope a minimum of 1/4" per foot (6mm per 30.4cm run).
Drain to be hard piped and insulated.
To prevent back flow, do not connect drains.
Separate drains for icemaker and condenser.
Water shut-off recommended within 10 feet (3m).
Follett recommends installation of Follett water filter system (part# 00130286) in icemaker
inlet water line.
Ambient
Air temperature
Water temperature
Water pressure – potable
Note: Water-cooled condenser pressure 150 psi (1034 kPa)
Heat rejection
Air-cooled rejects 11,000 BTU/hr to air
Water-cooled rejects 11,000 BTU/hr to water
Ice production
Air-cooled icemaker capacity/24 hrs.
Ambient Air Temperature F/C
F 60 70 80 90 100
C 16 21 27 32 38
1101 1036 969 901 811
50
499 470 440 409 368
10
60 1045 980 913 845 755
16 474 445 414 383 342
70 990 925 858 790 700
449 420 389 358 318
21
935 870 803 735 645
80
27 424 395 364 333 293
90 879 814 747 679 589
399 369 339 308 267
32
100˚F/38˚C max.
90˚F/32˚C max.
70 psi max. (483 kPa)
Water-cooled icemaker capacity/24 hrs.
Ambient Air Temperature F/C
F 50 60 70 80
10 16 21 27
C
lbs
862 862 862 862
50
kg
10 391 391 391 391
lbs
60 826 826 826 826
kg
16 375 375 375 375
lbs
790 790 790 790
70
kg
358 358 358 358
21
lbs
80 754 754 754 754
kg
27 342 342 342 342
lbs
90 718 718 718 718
kg
326 326 326 326
32
50˚F/10˚C min.
45˚F/7˚C min.
10 psi min. (89 kPa)
90
32
862 lbs
391 kg
826 lbs
375 kg
790 lbs
358 kg
754 lbs
342 kg
718 lbs
326 kg
5