Table of Contents
Advertisement
E
40 LPM @ 138 BAR
40 LPM @ 138 BAR
EHTMA CATEGORY
EHTMA CATEGORY
12535
To avoid seriou s injury o r death
28409
71073
DANGER
Failure to use hydraulic hose labeled and certified
Failure to use hydraulic hose labeled and certified
as non-conductive when using hydraulic tools on
as non-conductive when using hydraulic tools on
or near electric lines may result in death or
or near electric lines may result in death or
serious injury.
serious injury.
For proper and safe operation read owners manual
For proper and safe operation read owners manual
and mwke sure that you have been properly
and mwke sure that you have been properly
trained in correct procedures required for work
trained in correct procedures required for work
ELECTROCUTION
on or around electric lines.
on or around electric lines.
HAZARD
12412
7-9 GPM / 26-34 LPM
DO NOT EXCEED 2000 PSI / 140 BAR
•DO NOT EXCEED SPECIFIED FLOW OR PRESSURE •USE
•DO NOT EXCEED SPECIFIED FLOW OR PRESSURE •USE
CLOSED-CENTER TOOL ON CLOSED-CENTER SYSTEM.
CLOSED-CENTER TOOL ON CLOSED-CENTER SYSTEM.
•USE OPEN-CENTER TOOL ON OPEN-CENTER SYSTEM.
•USE OPEN-CENTER TOOL ON OPEN-CENTER SYSTEM.
•CORRECTLY CONNECT HOSES TO TOOL 'IN' AND 'OUT'
•CORRECTLY CONNECT HOSES TO TOOL 'IN' AND 'OUT'
PORTS. •IMPROPER HANDLING, USE OR MAINTENANCE
PORTS. •IMPROPER HANDLING, USE OR MAINTENANCE
OF TOOL COULD RESULT IN A LEAK, BURST OR OTHER
OF TOOL COULD RESULT IN A LEAK, BURST OR OTHER
TOOL FAILURE. •CONTACT AT A LEAK OR BURST CAN
TOOL FAILURE. •CONTACT AT A LEAK OR BURST CAN
CAUSE OIL INJECTION INTO THE BODY. •FAILURE TO
CAUSE OIL INJECTION INTO THE BODY. •FAILURE TO
OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS
OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS
PERSONAL INJURY.
03786 DS113000
03790 DS115000
The safety tag (p/n 15875) at
right is attached to the tool
when shipped from the factory.
Read and understand the safety
instructions listed on this tag
before removal. We suggest
you retain this tag and attach it
to the tool when not in use.
TOOL STICKERS & TAGS
D
30 LPM @ 138 B AR
03786
EHTMA CATEGORY
GPM Sticker (DS113000)
11207
03790
GPM Sticker (DS115000)
L
WA
108
71073
CE Tool Plate
29530
10-14 GPM / 38-53 LPM
DO NOT EXCEED 2000 PSI / 140 BAR
PERSONAL INJURY.
SAFETY TAG P/N 15875
12535
Circuit "E" Decal - DS115000 Only
11207
Circuit "D" Decal - DS113000 Only
29530
Sound Level Decal
1. FAILURE TO USE HYDRAULIC HOSE LABELED AND CERTIFIED AS
NON-CONDUCTIVE WHEN USING HYDRAULIC TOOLS ON OR NEAR
ELECTRICAL LINES MAY RESULT IN DEATH OR SERIOUS INJURY.
BEFORE USING HOSE LABELED AND CERTIFIED AS NON-
CONDUCTIVE ON OR NEAR ELECTRIC LINES BE SURE THE HOSE
IS MAINTAINED AS NON-CONDUCTIVE. THE HOSE SHOULD BE
REGULARLY TESTED FOR ELECTRIC CURRENT LEAKAGE IN ACCORDANCE
WITH YOUR SAFETY DEPARTMENT INSTRUCTIONS.
2. A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJECTION
INTO THE
BODY OR CAUSE OTHER SEVERE PERSONAL INJURY.
A
DO NOT EXCEED SPECIFIED FLOW AND PRESSURE FOR
THIS TOOL. EXCESS FLOW OR PRESSURE MAY CAUSE A
LEAK OR BURST.
B
DO NOT EXCEED RATED WORKING PRESSURE OF HYDRAU
LIC HOSE USED WITH THIS TOOL. EXCESS PRESSURE MAY
CAUSE A LEAK OR BURST.
C
CHECK TOOL HOSE COUPLERS AND CONNECTORS DAILY
FOR LEAKS. DO NOT FEEL FOR LEAKS WITH YOUR HANDS.
CONTACT WITH A LEAK MAY RESULT IN SEVERE PERSONAL
INJURY.
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE OPERA-
TION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
(shown smaller then actual size)
8
28409
Composit Decal
12412
Warning Decal
D DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO NOT ABUSE HOSE.
DO NOT USE KINKED, TORN OR DAMAGED HOSE.
3. MAKE SURE HYDRAULIC HOSES ARE PROPERLY CONNECTED TO THE
TOOL BEFORE PRESSURING SYSTEM. SYSTEM PRESSURE HOSE MUST
ALWAYS BE CONNECTED TO TOOL "IN" PORT. SYSTEM RETURN HOSE
MUST ALWAYS BE CONNECTED TO TOOL "OUT" PORT. REVERSING CON-
NECTIONS MAY CAUSE REVERSE TOOL OPERATION WHICH CAN RESULT
IN SEVERE PERSONAL INJURY.
4. DO NOT CONNECT OPEN-CENTER TOOLS TO CLOSED-CENTER HYDRAULIC
SYSTEMS. THIS MAY RESULT IN LOSS OF OTHER HYDRAULIC FUNCTIONS
POWERED BY THE SAME SYSTEM AND/OR SEVERE PERSONAL INJURY.
5. BYSTANDERS MAY BE INJURED IN YOUR WORK AREA. KEEP BYSTANDERS
CLEAR OF YOUR WORK AREA.
6. WEAR HEARING, EYE, FOOT, HAND AND HEAD PROTECTION.
7. TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE, ALL TOOL REPAIR
MAINTENANCE AND SERVICE MUST ONLY BE PERFORMED BY AUTHO-
RIZED AND PROPERLY TRAINED PERSONNEL.
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE OPERA-
TION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
Advertisement
Table of Contents
