JAI BM-141GE User Manual
  1. Manuals
  2. Brands
  3. JAI Manuals
  4. Digital Camera
  5. BM-141GE
  6. User manual

JAI BM-141GE User Manual

Digital monochrome / color progressive scan gige vision camera
Hide thumbs Also See for BM-141GE:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
BM-141GE
BB-141GE
Digital Monochrome / Color
Progressive Scan GigE Vision Camera
Document Version: Ver.1.2
BMB-141GE_Ver.1.1_Feb2010

Advertisement

Table of Contents
loading

Related Manuals for JAI BM-141GE

Summary of Contents for JAI BM-141GE

  • Page 1 User's Manual BM-141GE BB-141GE Digital Monochrome / Color Progressive Scan GigE Vision Camera Document Version: Ver.1.2 BMB-141GE_Ver.1.1_Feb2010...
  • Page 2 JAI Ltd., Japan and may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the use of its product and assumes no responsibility for any errors which may appear or for damages resulting from the use of the information contained herein.
  • Page 3 BM-141GE Supplement The following statement is related to the regulation on “ Measures for the Administration of the control of Pollution by Electronic Information Products “ , known as “ China RoHS “. The table shows contained Hazardous Substances in this camera.
  • Page 4 BB-141GE Supplement The following statement is related to the regulation on “ Measures for the Administration of the control of Pollution by Electronic Information Products “ , known as “ China RoHS “. The table shows contained Hazardous Substances in this camera. mark shows that the environment-friendly use period of contained Hazardous Substances is 15 years.

  • Page 5: Table Of Contents

    6.5.2 Internal Trigger Generator ................. 19 GigE Vision Streaming Protocol (GVSP) ............20 7.1. Digital Video Output (Bit Allocation) ..............20 7.2. Bit Allocation (Pixel Format / Pixel Type) – BM-141GE (monochrome) ......20 7.2.1 GVSP_PIX_MONO8 (8bit) ................. 20 7.2.2 GVSP_PIX_MONO10 (10bit) ..............
  • Page 6 8.2.9 Others ....................33 8.2.10 Note for 100BASE-TX connection .............. 33 8.3. Basic functions ....................34 8.3.1 Vertical Binning (BM-141GE only) .............. 34 8.3.2 BB-141GE. Bayer mosaic filter ............... 35 8.3.3 Partial Scanning (Fixed rate and variable) ........... 35 8.3.4 Decimation Readout (Draft) mode in vertical direction(BB-141GE only) ....

  • Page 7: General

    BM-141GE/BB-141GE is a GigE Vision compliant camera, belonging to the C3 Basic family. Both the monochrome version BM-141GE and the color version BB-141GE provide a frame rate of 30 frames/second at full resolution. Using vertical binning (BM-141GE only), draft mode (BB- 141GE only) or partial scan, the camera can achieve faster frame rates.

  • Page 8: Main Features

    • 30 frames/second with external trigger and full resolution • Increased frame rate with vertical binning (BM-141GE only) , draft mode(BB-141GE only) and fixed or variable partial scan • Exposure time from 63μs to 2 sec. using Pulse Width trigger mode •...

  • Page 9: Locations And Functions

    BM-141GE / BB-141GE 4. Locations and Functions 4.1. Locations and functions ③ ③ ④ ⑦ ⑫ D C IN/ TRIG POWER/ TRIG ⑧ LIN K A CT. ⑨ ⑩ Gig E ⑫ ⑥ ⑪ ① ⑤ ② 1. Lens mount C-mount (Note *1) 2.

  • Page 10: Flange Back Adjustment

    BM-141GE / BB-141GE 4.2. Flange back adjustment Flange back adjustment Flange back fixed ring screws    1. Attach the C mount lens to the camera (①). 2. Under the actual environment and the actual distance to the object, check whether it is possible to focus the lens by rotating the focus ring of the lens.

  • Page 11: Pin Assignment

    BM-141GE / BB-141GE 5. Pin Assignment 5.1 12-pin Multi-connector (DC-in/GPIO/Iris Video) Type: HR10A-10R-12PB (Hirose) male. Pin no. Signal Remarks (Seen from the rear of camera) +12 V DC input Opt IN 2 (-) / GND (*1) Opt IN 2 (+)/Iris Video out (*1)

  • Page 12: Internal Dip Switch

    BM-141GE / BB-141GE 5.4 Internal DIP switch In order to change, the top cover must be removed. SW601 SW600 For selection of OPT IN and For selection of TTL IN 1 75 Iris Video OUT ohm ON or OFF Factory default is UP position (OPT IN).

  • Page 13: Gpio (Inputs And Outputs)

    BM-141GE / BB-141GE 6. GPIO (Inputs and outputs) 6.1. Overview All input and output signals pass through the GPIO (General Purpose Input and Output) module. The GPIO module consists of a Look-Up Table (LUT – Cross-Point Switch), 2 Pulse Generators and a 12-bit counter.

  • Page 14: Lut (Cross Point Switch)

    Outputs from LUT described in the blue line block shows GPIO settings for LINE SELECTOR on JAI Camera Control tool and inputs for LUT on the left side shows GPIO settings for LINE SOURCE on JAI Camera Control tool right. Refer to Chapter 6.3 GPIO inputs/Outputs table.

  • Page 15: Recommended External Input Circuit Diagram For Customer

    BM-141GE / BB-141GE 6.2.1 Recommended External Input circuit diagram for customer E XTE RN A L IN P U T Use r JA I sid e C3_Series CAMER A sid e h iro s e -12 c onne c t o r + 3 .

  • Page 16: Inputs And Outputs Table

    BM-141GE / BB-141GE Conditions for Input Input Line Voltage Range +3.3V ～ +24V Input Current 6mA ～ 30mA Minimum Input Pulse Width to Turn 0.5μs Output Specifications Output Load(Maximum Current) 100mA Minimum Output Pulse Width 20μs Time Delay Rise 0.5μs ～ 0.7μs Rise Time 1.2μs ～...

  • Page 17: Configuring The Gpio Module (Register Settings)

    0xB0A4 0x0C:Pulse Generator 0 Reset reset 0x0D:Pulse Generator 1 0x10:Time stamp reset 0x11:Sequence table reset 0x7F: No connect Add 0x80 will result in low active output. The following shows JAI SDK Camera Control Tool for setting. Line Selector Line Source...

  • Page 18: 12Bit Counter

    BM-141GE / BB-141GE Line Polarity 6.4.2 12bit counter Internal Name GenICam Name Size Value (Range) Address Access 0xB000 Counter Clock Choice ClockSource 0x01: Pixel Clock 0x000: Bypass 0x001: 1/2 Dividing 0xB004 Counter Dividing Value ClockPreScaler 0x002: 1/3 Dividing 0xFFF: 1/4096 Dividing...

  • Page 19: Pulse Generators (19 Bit X 2)

    1/25KHz = 40µs Start Point = 0 End Point = 100 Pulse Generator 0 (GPIO Port 1 ) Repeat counter: 0 to 255 Length = 102 =0: Continuously repeated The following shows JAI SDK Camera Control Tool for setting Pulse Generator.
  • Page 20 BM-141GE / BB-141GE Address Internal Name GenICam name Access Size Value (range) Pulse Generator 0xB008 Length Counter 0 0x00001 to 0xFFFFF Length PulseGenerator 0xB00C Start point Counter 0(1) 0x00000 to 0xFFFFF StartPoint 0x00: infinite PulseGenerator 0x01: 1 time 0xB010 Start point Counter 0(2)

  • Page 21: Gpio Programming Examples

    BM-141GE / BB-141GE 6.5. GPIO programming examples 6.5.1 GPIO Plus PWC shutter Example: 10µs unit pulse width exposure control (PWC). Pixel clock is 58MHz. 580 clocks (680-100) equal 10µs. Address Register Value 0xA040 Trigger Mode 2 = PWC (Pulse Width Control)

  • Page 22: Internal Trigger Generator

    BM-141GE / BB-141GE 6.5.2 Internal Trigger Generator Example: Create a trigger signal and trigger the camera Address Register Value 0xA040 Trigger Mode 1 = EPS 0xB000 Clock Choice 1 = Pixel Clock  0xB004 Counter Dividing Value 1829= 1/1830(Line Rate)

  • Page 23: Gige Vision Streaming Protocol (Gvsp)

    7. GigE Vision Streaming Protocol (GVSP) 7.1. Digital Video Output (Bit Allocation) Although the BM-141GE and BB-141GE are digital cameras, the image is generated by an analog component, the CCD sensor. The table and diagram below show the relationship between the analog CCD output level and the digital output.

  • Page 24: Gvsp_Pix_Mono10_Packed (10 Bit)

    BM-141GE / BB-141GE 0 1 2 3 4 5 6 7 8 9 X X X X X X 0 1 2 3 4 5 6 7 8 9 X X X X X X 7.2.3 GVSP_PIX_MONO10_PACKED (10 bit) 1 Byte...

  • Page 25: Gvsp_Pix_Bayrg12 " Bayer Rg12

    BM-141GE / BB-141GE 0 1 2 3 4 5 6 7 8 9 X X X X X X 0 1 2 3 4 5 6 7 8 9 X X X X X X Even Line 1 Byte 2 Byte...
  • Page 26 BM-141GE / BB-141GE 0x0110000D:BAYRG10 0x0110000E:BAYGB10 0x01100011:BAYRG12 0x01100012:BAYGB12 Note: BB-141GE has the same Bayer sequence for Full and any of partial scanning as RG. Therefore, comparing full scanning and partial scanning, the center might be shifted. Note: As the Pixel Format type, BB-141GE supports BAYER GB 8, BAYER GB 10 and BAYER...

  • Page 27: Functions And Operations

    (NICs) and Switches/Routers are suitable for use with the GigE Vision compliant camera. JAI will endeavor to continuously verify these combinations, in order to give users the widest choice of GigE components for their system design.

  • Page 28: Video Data Rate (Network Bandwidth)

    ♦ In the case of using Jumbo Frames, the packet data will be improved by 2 %. ♦ For BM-141GE and BB-141GE, the jumbo frame size can be a maximum 16384 Bytes (factory setting is 1428 Bytes). The NIC must also be set to support Jumbo Frames(see chapter 8.2.4).
  • Page 29 GigE Vision Transport Layer Control section of the camera control tool (see below). For BM-141GE and BB-141GE, users may enter any value for the packet size and the value will be internally adjusted to an appropriate, legal value that complies with the GenICam standard.
  • Page 30 MONO12Packed BAYRG8 BAYGR8 BAYGB8 BAYBG8 BAYRG10 BAYGR10 BAYGB10 BAYBG10 BAYRG12 BAYGB12 RGB8 BGR8 RGB10V1Packed RGB10V2Packed Calculation example: BM-141GE Pixel type Mono8 Item Unit Symbol Setting Image Width [pixels] 1392 Image Height [pixels] 1040 Bits per Pixel [bits] Frame Rate [fps] 30.12...

  • Page 31: Disable Firewalls

    BM-141GE / BB-141GE 8.2.3 Disable Firewalls To ensure proper functions of the JAI SDK & Control Tool, all firewalls must be disabled. This also includes the Windows firewall. Click [Start], [Control Panel] for accessing the Windows firewall configuration. 8.2.4 Enabling Jumbo Frame (1) Click [Start] and click [Control Panel].
  • Page 32 BM-141GE / BB-141GE Note: Intel(R) 1000 is used in this example. If different NICs are used, the following setup tabs will likely be different. Follow the tabs associated with the specific NIC used. (8)Click [Advanced] tab.

  • Page 33: Setting Receive Descriptors

    BM-141GE / BB-141GE (9) Select Jumbo Frames of Property, and select 16128 under Value. (10)Click [OK]. (11)Close [Device Manager]. (12)Close [System Properties] by clicking [OK]. 8.2.5 Setting Receive Descriptors If the Network Connection Properties list contains a property called Receive Descriptors, then change its property to the maximum value supported by the NIC installed in the computer.

  • Page 34: Interrupt Moderation Rate

    Packet Packet Duration of the entire packet, with delay JAI Control Tool has a built in wizard for calculating Inter-Packet Delay. When the Inter-Packet Delay function is activated, a button appears on the right hand side of the bar. Click the button to open the calculation wizard window.

  • Page 35: Confirm The Filter Driver Is Used

    ♦ The filter driver is installed as an optional function when JAI SDK is installed. If the filter driver is not installed at that time, it can be installed , All Programs ⇒ JAI SDK ⇒ GigE Vision Filter Driver ⇒ Install GigE Vision Filter Driver.

  • Page 36: Others

    Depending on the performance of the computer used, the frame rate may be decreased. Confirm the packet size is increased. It can be set on Camera Control Tool provided in JAI SDK. 8.2.10 Note for 100BASE-TX connection ♦...

  • Page 37: Basic Functions

    BM-141GE / BB-141GE 8.3. Basic functions The BM-141GE and BB-141GE cameras are progressive scan cameras with 12, 10 or 8-bit video output in Gigabit Ethernet. The camera has 1/2, 1/4 or 1/8 partial scanning for faster frame rates. Vertical binning and Draft mode are also available.

  • Page 38: Bb-141Ge. Bayer Mosaic Filter

    The partial scanning function uses the middle of the image vertically to achieve faster frame rate. This is very useful when capturing and inspecting the image which does not require the height. BM-141GE/BB-141GE has 4 types of partial scan modes such as 2/3, 1/2, 1/4 an 1/8. Mode...
  • Page 39 BM-141GE / BB-141GE  How to calculate total line number and frame rate on variable partial scan mode Variable partial scan The start line setting 1st line to 1025th line Read out height 8 lines to 1032 lines Total lines = OB period in the upper part of the frame (L) + Fast Dump period in the upper...

  • Page 40: Decimation Readout (Draft) Mode In Vertical Direction(Bb-141Ge Only)

    The same for both Monochrome and color Fig.14 Draft mode 8.3.5 Electronic Shutter BM-141GE / BB-141GE have conventional shutter functions as well as the GenICam standard “Exposure Time Abs” function. Preset Shutter 9 steps preset shutter are available: OFF (1/30);...
  • Page 41 BM-141GE / BB-141GE Exposure Auto Continuous (Auto Shutter) In this mode, the shutter continuously functions in the range of OFF to 1/500 s. Exposure Time Abs (GenICam Standard) This is a function specified in the GenICam standard. The shutter speed can be entered as an absolute exposure time in microseconds (μs) in register address 0xA018.

  • Page 42: Auto-Iris Lens Video Output (12-Pin Hirose Connector)

    This function makes the BM-141GE and BB-141GE well- suited for Intelligent Traffic Systems (ITS) and high-end security or surveillance applications.

  • Page 43: Auto-Detect Lval-Sync / A-Sync. Accumulation

    Only AGC No Auto functions available 8.3.8 Auto-detect LVAL-sync / a-sync. accumulation This function replaces the manual setting found in older JAI cameras. Whether accumulation is synchronous or asynchronous in relationship to LVAL depends on the timing of the trigger input.

  • Page 44: Rear Panel Indicator

    In order to offload the host, the BB-141GE can adjust Gr, R, Gb and B levels individually to get the white balance for the Bayer output signal. The gain is fixed to 1.0 for BM-141GE. BB-141GE has Manual white balance, One-push Auto white balance, Continuous Auto white balance and Preset white balance of 3200K, 4600K and 5600K.

  • Page 45: Programmable Look Up Table (Lut)

    BM-141GE / BB-141GE 8.4.3 Programmable Look UP table (LUT) BM-141GE/BB-141GE has a programmable look-up table (LUT) that can be used to adjust the transfer function of the video output. In other words, LUT can be used to create a user defined Knee of Gamma function.
  • Page 46 BM-141GE / BB-141GE The Gamma setting and LUT cannot be used at the same time. This is because the Gamma setting and LUT use the same data table. Gamma setting Note: LUT Enable is False. When LUT is used, the Gamma setting should be 1.0 (OFF). Then “LUT Enable” is set at...

  • Page 47: Blemish Compensation Circuit

    Bayer color pixels on both columns. The number of compensations is up to 8 pixels on both L and R channels. The circuit built in BM-141GE/BB-141GE is ON/OFF function for the compensated data in the factory. The default setting is OFF.

  • Page 48: Sensor Layout And Timing

    BM-141GE / BB-141GE 8.5. Sensor Layout and timing 8.5.1 CCD Sensor Layout The CCD sensor layout with respect to pixels and lines used in the timing and video full frame read out is shown below. Effective Video Output 1040 1052...

  • Page 49: Horizontal Timing

    BM-141GE / BB-141GE 8.5.2 Horizontal timing The LVAL period is shown for normal continuous mode. 1 LVAL 1830 clk=31.551 us 1clk=17.241 ns LVAL Valid data DATA OUT 1392ck 40ck 398 ck 1432ck DVAL 1392ck 16ck Fig.22 Horizontal timing 8.5.3 Vertical timing The FVAL period for normal continuous mode full scan is shown.

  • Page 50: Partial Scanning

    BM-141GE / BB-141GE 8.5.4 Partial Scanning The FVAL period is shown for 1/2 partial scan in normal continuous mode. Vertical Timing The diagram and table below provide vertical timing information for the fixed partial scan settings 1/2, 1/4, 1/3 and 2/3.

  • Page 51: Vertical Binning

    By activating this function, the frame rate is increased to 50.18 fps. This function is available only for BM-141GE. Important Note Vertical Binning cannot be used together with the Partial Scanning.

  • Page 52: Draft Mode

    BM-141GE / BB-141GE Vertical timing 50.18 fps FRAME RATE 527L Vertical Binning LVAL FVAL 1+2 3+4 1037+1038 1039+1040 DAVL 520L Valid data DATA Exposure Fig.27 Vertical Timing for Vertical Binning 8.5.6 Draft mode Draft mode function is only available on the BB-141GE. One RG line and one GB line out of 8 lines are accumulated and read out as one line.

  • Page 53: Operation Modes

    BM-141GE / BB-141GE Draft Frame rate 268L 101.17 fps LVAL FVAL 1 4 9 12 1036 1033 DVAL 260L 1025 1028 DATA Valid data Exposure Fing.29 Vertical timing for Draft mode 8.6. Operation Modes This camera can operate in 8 primary modes.

  • Page 54: Edge Pre-Select (Eps) Trigger Mode

    For timing details, refer to fig. 22. through fig.31. To use this mode: Set function: Trigger mode Scanning Full, Partial Vertical binning ON / OFF (BM-141GE only) Draft Mode ON / OFF (BB-141GE only) Shutter mode Preset, Programmable, Exposure Time Abs Shutter speed 1/60 to 1/10,000...

  • Page 55: Pulse Width Control (Pwc) Trigger Mode

    For timing details, refer to fig. 22. through fig. 29 and fig.32 and 33. To use this mode: Set function: Trigger mode Scanning Full, Partial Vertical binning ON / OFF (BM-141GE only) Draft Mode ON / OFF (BB-141GE only) Accumulation (Auto) LVAL sync / LVAL a-sync Other functions and settings Input:...
  • Page 56 BM-141GE / BB-141GE LVAL_sync timing Trigger invalid period Trigger falling : 1 Frame + 2L Prohibited TRIG 2L(min.) LVAL 1L(max) CCD Exposure Exposure Time FAVL 2L ～ 3L When trigger is input during FVAL HIGH, (Full:63us to 94us / V binning:75us to 113us) LVAL sync Mode is set.

  • Page 57: Reset Continuous (Rct) Trigger Mode

    After the trigger pulse is input, a fast dump read out is performed. In the BM-141GE and BB-141GE, this period is 6.77ms which is 215L. The exposure time is determined by the pre-set shutter speed. If no further trigger pulses are applied, the camera will continue in normal mode and the video signal is not output.

  • Page 58: Smearless Eps Trigger Mode

    To use this mode: Set function: Trigger mode Smearless Edge PreSelect Scanning Full, Partial Vertical binning ON / OFF (BM-141GE only) Draft Mode ON / OFF (BB-141GE only) Shutter mode Preset, Programmable, Exposure Time Abs Shutter speed 1/60 to 1/10,000...

  • Page 59: Sequential Trigger Mode (Eps)

    BM-141GE / BB-141GE 8.6.6 Sequential Trigger Mode (EPS) This mode allows the user to define a preset sequence of up to 10 images, each with its own ROI, Shutter and Gain values. As each trigger input is received, the image data with the preset sequence is output as described below.

  • Page 60: Delayed Readout Eps And Pwc Modes (Eps And Pwc)

    BM-141GE / BB-141GE Please refer to the detailed register description on Camera Register Map which is included in the SDK. The following table shows the minimum trigger interval in synchronous accumulation mode. In case of asynchronous accumulation mode, the exposure time should be added to figures in this table.

  • Page 61: Optical Black Transfer Mode

    V Binning Scan 1392 1392 1408 16 pixels for horizontal is added. ます Note: The menu for ON or OFF of OB transfer mode is found on the Image Format Control of JAI SDK Camera Control Tool.

  • Page 62: Multi Roi Mode (Multi Region Of Interest)

    Auto Note 1: Write ID in register address 0xA040 in order to set trigger mode. Note 2: Vertical Binning is available only for BM-141GE. Note 3: Smearless EPS modes suppress the smear on the upper part of the image. Note 4: The Auto iris output is only effective on Normal scan and Vertical binning modes. It is...

  • Page 63: Special Note For Settings

    BM-141GE / BB-141GE 8.8. Special note for settings 8.8.1 When the image size is changed When the image size is changed while the image is being capturing, stop the image capturing by pressing “Stop Acquisition”. Then change the value. It is possible to set shutter value and gain settings while watching the picture on the screen.

  • Page 64: Register Map

    BM-141GE / BB-141GE 9. Register Map The table below provides detailed information for the hardware registers used for controlling the camera and obtaining information on the status of the camera. The content of this register map is also found in the XML file, as stipulated by the GenICam standard.
  • Page 65 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value 0x066C persistent gateway Valid if Persistent IP is enabled 0x000000 number of number of available message 0x0900 This camera has 1 messaging channels channel number of stream...
  • Page 66 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value primary stream channel 0x0d18 SCDA0 destination address register Standard camera functions registers: Value / Range Default Address Function Description of value value 0= Preset shutter Sets exposure time for image 1= Prog.
  • Page 67 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value 0=OFF 0xA094 Draft 1=ON 0=OFF 0xA0B0 AGC select 1=Continuous AGC/Auto shutter 0xA0B4 0 to 8192 reference 0=Manual/One- push White Balance 1=Continuous 0xA0C0 BB-141GE only mode 2=3200K 3=4600K...
  • Page 68 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value 0.0625ºC step, 0xA1FC Temperature Specified range: -55 ºC to 150 ºC -40 ºC 0xA200 LUT ENABLE 0xD000 Video Look UP 1024 to 16384 4096 table 0xD3FC 1=User area1...
  • Page 69 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value Sequence Master 0xC088 -170 to 700 Pre-program 5 Gain value Gain 5 Sequence Master 0xC08C -170 to 700 Pre-program 6 Gain value Gain 6 Sequence Master 0xC090...
  • Page 70 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value Sequence ROI Height 0xC144 8 to 1040 Size-Y9 Sequence ROI Height 0xC148 8 to 1040 Size-Y10 Sequence ROI 0xC14C 0 to 1384 Offset-X1 Sequence ROI 0xC150 0 to 1384...
  • Page 71 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value Sequence ROI 0xC1A8 Internal Repetition 1 to 50 Sequence ROI 0xC1AC Internal Repetition 1 to 50 Sequence ROI 0xC1B0 Internal Repetition 1 to 50 Sequence ROI 0xC1B4...
  • Page 72 BM-141GE / BB-141GE Value / Range Default Address Function Description of value value 0xA504 ROI1 Size X 8 to 1392 Width W.Max 0xA508 ROI1 Size Y 8 to 1040 Height H.Max 0xA50C ROI1 Offset X 0 to 1384 Horizontal offset...
  • Page 73 BM-141GE / BB-141GE Bit28:GEV_EVENT_ START_OF_TRANSF Bit27:GEV_EVENT_ END_OF_TRANSFER Bit26:EVENT TRIGGER ERROR Camera Reset 0=OFF 0xA640 ( from 1=Reset GenIcam) 0xA644 Soft Trigger 1 0=LOW, 1=HIGH 0XA648 Soft Trigger 2 0=LOW, 1=HIGH 0xA64C Soft Trigger 3 0=LOW, 1=HIGH GPIO Registers: Addres Value / Range...
  • Page 74 BM-141GE / BB-141GE Addres Value / Range Default Function Description of value value GPIO Selector: Selector 0xB060 For Camera Trigger Line Source CAMERA TRIGGER 0 Selector 0xB064 For Delayed Trigger 0x00:CAMERA LVAL CAMERA TRIGGER 1 Selector 0x01:CAMERA DVAL 0xB070 TTL out 1...

  • Page 75: External Appearance And Dimensions

    BM-141GE / BB-141GE 10.External Appearance and Dimensions 4-M3depth C M ount ( dept h0. 20) ( 1. 77) ( 0. 28) 2- M 2 ( 0. 28) ( 1. 57) ( 1. 77) D C IN/ TRIG POWER/ TRIG LIN K A CT.

  • Page 76: Specifications

    BM-141GE / BB-141GE 11.Specifications 11.1 Spectral response Fig.39 Spectral response for BM-141GE Relative Wave Length (nm) Fig.40 Spectral response for BB-141GE...

  • Page 77: Specification Table

    Start line from 1 to 1025, height(lines) from 8 to 1032 Vertical Binning 1392 (h) x 520 (v) 50.18 fps. H = 26.447kHz ( BM-141GE only)) Draft 1392 (h) x 260 (v) 101.17 fps. H = 27.128 kHz (BB-141GE only) Region-of-interest (ROI) User Definable.
  • Page 78 BM-141GE / BB-141GE Specifications BM-141GE BB-141GE Control interface Register based. GigE Vision / GenIcam compliant Functions controlled via GigE Shutter, Gain, Black Level, Trigger mode, Read out mode, Vision Interface GPIO setup ,ROI ( GenIcam mandatory functions ) Packet size, Delayed ( Frame ) read-out, inter-packet delay GigE Vision Streaming Control Jumbo frame can be set at max.

  • Page 79: Precautions

    BM-141GE / BB-141GE 12.Appendix 12.1. Precautions Personnel not trained in dealing with similar electronic devices should not service this camera. The camera contains components sensitive to electrostatic discharge. The handling of these devices should follow the requirements of electrostatic sensitive components.

  • Page 80: Caution When Mounting The Camera

    When exporting this product, please follow the export regulation of your own country. 12.6. References 1. This manual for BM-141GE / BB-141GE can be downloaded from www.jai.com 2. Datasheet for BM-141GE / BB-141GE can be downloaded from www.jai.com 3. Camera control software can be downloaded from www.jai.com 4.
  • Page 81 BM-141GE / BB-141GE Index Auto Iris Lens..........39 Inter-Packet Delay ........24 Bit Allocation ........20, 21 Lens mount ..........73 Blemishes ..........74 Network Interface Cards ....... 24 CAMERA TRIGGER ........14 Cat6 Ethernet ........24, 25 CCD sensor .......... 72, 75 CCD Sensor ..........

  • Page 82: Change History

    BM-141GE / BB-141GE Change History Month/Year Revision Changes New issue Feb.2010 Add the details of LUT function. Correct the auto iris circuit. Add 12.4 Caution for mounting the camera Correct typing mistakes.

  • Page 83: User's Record

    Company and product names mentioned in this manual are trademarks or registered trademarks of their respective owners. JAI A-S cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification.

This manual is also suitable for:

Bb-141ge

Table of Contents