Advertisement
THINGS TO CHECK BEFORE YOU START TO INSTALL
REMOTE LOCATION -- You can install the RO
assembly or water supply saddle valve in another
place away from the RO faucet (please see page
16).
•
REPLACING ANOTHER RO SYSTEM -- We
suggest you remove all parts of another RO system,
and use everything included with your new RO
system.
TOOLS AND MATERIALS
YOU WILL NEED
• W16" and 112" open end wrenches.
II pliers and adju_able wrench.
• slotted and Phillips head screwdrivers
• plumbers putty
• • pipe joint compound (tread seal)or teflon tape,
approved for use on potable water-supplies.
• hand or battery powered drill with I/8" and I14"
bits (if needed for the cold water supply saddle
valve and for the drain clamp, page 6)
• electric drill and bits, if hole is needed for the
RO faucet, page 7
CAUTION:
TO
AVOID
DAMAGING
A SINK
BEYOND
REPAIR,
CONSULT
A QUALIFIED
PLUMBER
OR
INSTALLER
FOR
GUIDES
•
BEFORE DRILLING HOLES IN PORCELAIN OR
STAINLESS STEEL
5 STEPS TO INSTALL THE SYSTEM
I
STEP 1 - INSTALL THE COLD WATER SUPPLY SADDLE VALVE, PAGE 6.
STEP 2 - INSTALL THE DRAIN CLAMP, PAGES 6 AND 7.
STEP 3 - INSTALL THE FAUCET, PAGES 7-9.
A - PREPARE MOUNTING
HOLE
B - ASSEMBLE FAUCET
C - FASTEN FAUCET IN PLACE
STEP 4 - MAKE ELECTRICAL, AND REMAINING TUBING CONNECTIONS.
STEP 5 - SANITIZING,
PRESSURE TESTING, PLACING IN "SERVICE _'.
5
Advertisement
